Osc Page - RME Audio MADIface USB User Manual

21.7.3 OSC Page

The OSC page has four independent settings for up to four MIDI remote controls via Open
Sound Control (OSC). This is a network based remote protocol that can be used for example by
Apple's iPad with the app TouchOSC or Lemur to wirelessly remote control TotalMix FX running
on a Mac or Windows computer.
Index
Select one of four settings pages and thus remote controls. Settings are remembered automati-
cally. To activate or deactivate any of the four remote controls check or uncheck 'In Use'.
TotalMix FX OSC Service
IP. Shows the network address of the
computer running TotalMix FX (local
host). This address must be entered on
the remote side.
Host Name. Local computer name.
Port incoming. Must match the remote
entry 'Port outgoing'. Typical values are
7001 or 8000.
Port outgoing. Must match the remote
entry 'Port incoming'. Typical values are
9001 or 9000.
Remote Control
IP or Host name. Enter the IP or host
name of the remote control. Please note
that the IP number usually works better
than the host name.
Options
Send Peak Level.
transmission of the peak level meter
data. Peak Hold activates the peak hold
function as set up for the TotalMix level
meters in the preferences.
52
Activates the
User's Guide MADIface USB © RME