Policy Routing - Billion BiPAC 8700VAX(L)-1600 User Manual

Policy Routing

Here users can set a route for the host (source IP) in a LAN to access outside through a specified a
WAN interface to the next hop.
The following is the policy Routing listing table.
Click Add to create a policy route.
Policy Name: User-defined name.
Physical LAN Port: Select the LAN port.
Source IP: Enter the Host Source IP.
Interface: Select the WAN interface (exit interface) of local router to the next hop.
Default Gateway: Enter the gateway IP address/ the entry address of the next hop,
Click Apply to apply your settings. And the item will be listed in the policy Routing listing table. Here
if you want to remove the route, check the remove checkbox and press Remove to delete it.
280