Billion BiPAC 8700VAX(L)-1600 User Manual page 215

to the router as what we usually perform.
But if user does not get a fax or he wants to store the fax to the file directly, he then can enable Fax
Reception feature. Select or enter manually the reception path for the file. (Here user can turn to
USB for help.)
1) Set the field "Incoming Phone Port" to "FAX Reception" at the "SIP Account" page.
2) Set the path user wants fax file saved at "FAX Recipient's path" at the "SIP Device" page.
3) The incoming VoIP call for the specified VoIP account will be treated as Fax and saved to path.
FAX Recipient's E-mail: Enter the recipient's email address. Once the fax file is delivered, the fax
file will be mailed to the account specified by the "Recipient's Email",
Delete Files After Sending: The files will be deleted from system once the mail is sent out.
DND
User can set the time period here, during which both incoming VoIP calls will be rejected.
Time Schedule: When set to "Always On", all the incoming calls will be rejected constantly; and also
you can set the precise time when the incoming calls are supposed to rejected. Or you can select
the already set timeslot in "Time Schedule". And when set to "Disable", there will be no time
restrictions on incoming calls. See Time Schedule.
Call Features
Call Wait: Enable to activate Call Wait feature. When you are busy on a call, and another call comes
in, while the Call Wait feature is enabled, you can hear a hint sound indicating there is another call in
for you to decide whether to answer by slightly pressing the key "Flash" to keep the original call.
Three Way Conference Call: Enable to activate three way conference call.
Tone Control
Default Ring: Support "Follow Locale selection" (Different countries have their special tone
mechanism) and another 4 embedded ring tones.
Dial Tone: Support "Follow Locale selection" and another 5 embedded dial tones.
Gain Control
Gain control is to reduce the bad performance of quality issue caused by noise or echo, etc. Rx
means the performance of receiving and the Tx implies the performance of transimitting. A plus
quantity is to raise the performance while a negative quantity is to cut the performance (Rx: +1 to
increase the performance of receiving by 1 point and if set -1, the performance will be cut by 1 point,
the range is -20- 20. ).
Phone Port 1 Gain: Set the gain. Tune the gain between -20-20 of the Rx and Tx respectively to
ensure a clear phone call.
Phone Port 2 Gain: Set the gain. Tune the gain between -20-20 of the Rx and Tx respectively to
ensure a clear phone call.
210