Billion BiPAC 8700VAX(L)-1600 User Manual page 18

Port
POWER
1
2 ON/OFF
Gigabit
3
WAN
4 LAN1~4
5 USB
FXS1/2、
6
(RJ-11
connector)
7 DSL
8 WPS
9 WLAN
10 Reset
Connect the supplied Power Adapter to this port.
Power ON/OFF switch
Connect to Fibre/ Cable/ xDSL Modem with a RJ-45 cable, for
broadband connectivity
* Note: this port is a LAN/WAN configurable port.
Connect a STP Ethernet cable to one of the four LAN ports when
connecting to a PC or an office/home network of 10Mbps /100Mbps
/1000Mbps
Connect the USB device (Printer, USB 2.0 storage, 3G/LTE 3G USB
modem) to this port.
Connect your analog phone set to this port with the RJ-11 cable
Connect to the xDSL/ telephone network with RJ-11 cable(telephone)
Press & hold the button for 2 seconds to trigger WPS function
* For WPS configuration, please refer to the WPS section in the
User Manual.
Press & hold the button for more than 6 seconds to enable/disable
wireless
Push and hold the reset button for 5 seconds to restore to its factory
default settings (this is used when you cannot login to the router, e.g.
forgot your password).
13
Meaning