Avaya 1120E User Manual page 76

Configuring the IP Deskphone
Deskphone. If Calling Line ID (CLID) of the far-end is available, then the information is sent to the
attached analog device. An analog (500/2500-type) telephone or fax machine that supports Calling
Line ID displays the information on the screen.
The following table displays the characteristics of ATA.
Table 12: Summary of ATA characteristics
Key Events
LEDs
Attached Indicator
Back Light
Message Waiting
External Alerter
Incoming Call
Caller ID Information
Call Answer
Outgoing Call
Call Release
May 2016
Feature
Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
Description
In addition to On hook, Off hook events, dial pad
digit events from the attached analog device are
also supported. Key press events on the adapter are
sent to the IP Deskphone through the USB. After the
IP Deskphone receives these events, it maps them
to the corresponding key events as if the keys on
the IP Deskphone are pressed.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
When there is an incoming call, the IP Deskphone
sends an alerting event to the adapter. The adapter
produces the ring tones for the attached analog
device to indicate there is an incoming call on the IP
Deskphone.
Caller ID, if available, is also sent to the adapter.
The adapter sends the CLID to the attached analog
device for display.
You can answer an incoming call by pressing the
Headset key on the IP Deskphone or the Off Hook
key on the attached analog device. After a call is
answered, the adapter converts the digital voice
data to analog and sends it to the attached analog
device.
You can make an outgoing call by either using the
Headset key on the IP Deskphone or the Off Hook
key on the attached analog device. When off hook,
the IP Deskphone streams dial tone to the adapter.
The telephone number can be dialed using the key
pad of the IP Deskphone or the key pad of the
analog device. After a call is answered, the adapter
converts the digital voice data to analog and sends it
to the attached analog device.
You can release an incoming call or an outgoing call
by either pressing the Release (Goodbye) key on
Table continues...
®
User Guide 76