Table of Contents
Advertisement
" '
After the self-test completes successfully, the screen in figure 3-3 appears. Login is required to access the
console interface. The factory default username is "admin" without password. You may change it in the Misc
Configuration. To access to the Main Menu, please always enter the correct username and password.
)
#
)
)
Switch allows users to configure the device via menu screens.
To work within the menu, please follow the guidelines shown in Table 3-1.
Item
Value 0-9
TAB KEY
Arrows KEY
BACKSPACE
ENTER KEY
SPACE KEY
ESC
The main menu enables you to view and manage the Switch settings. Use the "Tab" keys to move the highlight over a
selection. Press " Enter" key for chooses Smart function of Switch. After entering into any smart function
screen, choose <Edit> for configuring. Then Press the "Space Bar" to toggle back and forth between the
options. After setup completed, press "ESC" key to return to Actions menu and use the "TAB" key to choose
the <Save> for save the current configuration. You can also choose each function through press the value 0-9
on your keyboard. Please refer to figure 3-4 for available options on main menu.
Figure 3-2 Power-up System Self-diagnostic screen
Figure 3-3 Switch Console Login screen
Description
Choose one item from the console screen.
Choose next item from the console screen.
¡ £ ¢ ¥ ¤ ¦
means up, down, left, right .
Back to previous item from the console screen.
Access the highlighted item from the console screen.
When a List item is performed, the Space key starts
the selection and scrolls through the available choices.
Return to the actions menu.
Table 3-1 General Guideline within the Menu
#
9
Advertisement
Table of Contents
