Table of Contents
Advertisement
O
Object
POE Ports Config
POE Port Status
Return to Main Menu
Table 3-14 Descriptions of the Switch Information screen Objects
3.2.11.1 Advanced Switch Configuration
Press 1 on your keyboard or use the "TAB" key to move the highlight to the POE Ports Config and press
"Enter" to access the screen of POE Ports Config from the POE Configuration screen (please see the
figure 3-49).
Table 3-14 shows the descriptions of the POE Ports Config screen Objects. Use the "TAB" key to choose the
<Edit>, then start to modify these settings. The screen of POE Ports Config in figure 3-50 appears.
O
Object
Port
List the port number for configuration.
Enable
Allow user to Enable / Disable POE function.
Priority
Allow user to set the POE power provision priority. The priority range is from 0 to 11, in which the 0
is the highest and the 11 is the lowest.
After setup is completed. Press "ESC" key to return to Actions menu and use the "TAB" key to choose the <Save> for
saving the current configuration. The screen in figure 3-51 appears with message "Operation completed successfully!"
3.2.11.2 POE Port Status
Press 2 on your keyboard or use the "TAB" key to move the highlight to the POE Port Status and press
"Enter" to access the screen of POE Port Status from the POE Configuration screen (please see the figure
3-52).
Table 3-16 shows the descriptions of the POE Port Status screen Objects. Use the "TAB" key to choose the
<Refresh>, then the system will refresh the port status on screen.
26
Description
Allow user to configure the POE function and power provision priority. Please
refer to chapter 3.2.11.1.
Allow user to check the POE PD power usages. Please refer to chapter
3.2.11.2.
Allow return to the Console Main Menu. Please refer to chapter 3.2.11.3.
Figure 3-50 PoE Ports Config Screen
Description
Table 3-15 Descriptions of the POE Ports Config screen Objects
Figure 3-51 POE Ports Config save successfully Screen.
Advertisement
Table of Contents
