Q O S Configuration - Planet FGSW-2402PVS User Manual

Figure 3-5 Port Status Screen
O Object
Port
Enable
Link
Spd/Dpx
Flow Ctrl
" %
Press 2 on your keyboard or use the "TAB" key to move the highlight to the Port Configuration and press
"Enter" to access the screen of Port Configuration from the Main Menu screen (please see the figure3-4).
The screen of Port Configuration in figure 3-6 appears. Table 3-3 describes the Port Configuration objects.
This menu allows you to change the port configuration of the Switch. The user can disable/enable each port and
determine each port's auto-negotiation, mode, speed, duplex mode, flow control. Use the "TAB" key to choose
the <Edit> then press "Enter". Then start to modify these settings. Use the "TAB" key to move the highlight to
the object and press the "Space Bar" key to toggle back and forth between the options. After setup completed,
press "ESC" key to return to Actions menu and use the "TAB" key to choose the <Save> for saving the current
configuration.
O Object
Port
Enable
Auto
Spd/Dpx
Flow Ctrl
Table 3-3 Descriptions of the Port Configuration Screen Objects
Due to the hardware restriction, port #25/ port # 26 of the Switch does not allow to configure the speed and
duplex mode. The operation of the two ports will base on the table below.
Module-slot / Port #25, #26
MII-TP
MII-GT / FGSW-2620PVS
MII-SC / MII-Sxx
MII-ST
MII-SA20/SB20
MII-SX
MII-LX; MII-Lxx
Indicate port 1 to port 24, and 2-module slot.
Display disable or enable on each port.
Display current link status on each port.
Display current speed duplex mode on each port.
Display current flow control status on each port.
Table 3-2 Descriptions of the Port Status screen Objects
Figure 3-6 Port Configuration Screen
Description
Indicate port 1 to port 24, and 2-module slot.
Allow user to disable or enable each port.
Allow user to disable or enable Auto negotiation feature on each port.
Allow user to change the speed duplex mode on each port.
Allow user to disable or enable flow control on each port.
Module / Port Type
100Base-TX; RJ-45
10/100/100Base-T; RJ-45
*1
100Base-FX; SC
100Base-FX; ST
100Base-FX;
Single SC
1000Base-SX; SC
*1
1000Base-LX; SC
Table 3-4 Operation of MII-series module
Description
Speed / Duplex
Auto-negotiation
Auto-negotiation
Force 100 Full-duplex mode
Force 100 Full-duplex mode
Force 100 Full-duplex mode
Force 1000 Full-duplex mode
Force 1000 Full-duplex mode
11