Motorola SURFboard SVG1202 User Manual page 45

FIELD
WPA Pre-Shared Key
Show Key
RADIUS Server
RADIUS Port
RADIUS Key
Group Key Rotation Interval
WPA/WPA2 Re-auth Interval
WEP Encryption
Shared Key Authentication
802.1x Authentication
Network Key 1 – 4
Current Network Key
PassPhrase
SVG1202 Wireless Voice Gateway • User Guide
DESCRIPTION
Sets the WPA Pre-Shared Key (PSK); either an 8-63 ASCII character
string or a 64-digit hex number. This is specified when the Network
Authentication method is WPA-PSK.
Show Key - displays the WPA Pre-Shared Key.
Sets the RADIUS server IP address to use for client authentication
using the dotted-decimal format (xxx.xxx.xxx.xxx).
Sets the UDP port number of the RADIUS server; default is 1812.
Sets the shared secret for the RADIUS connection; key is a 0 to 255
character ASCII string.
Sets the WPA Group Rekey Interval in seconds. Set to zero to
disable periodic rekeying.
Sets the amount of time the wireless router can wait before re-
establishing authentication with the CPE.
Enables or disables Wired Equivalent Privacy encryption.
Sends an authentication request to the access point. Then the
access point sends a challenge text to the CPE.
The CPE encrypts challenge text which it sends to the access point.
The access point decrypts and compares the message with the
original challenge text. If they are the same, the access point lets the
CPE connect; if it does not match, the access point does not let the
CPE connect.
Uses a stronger authentication than WEP.
Sets the static WEP keys when WEP encryption is enabled.
Enter five ASCII characters or 10 hexadecimal digits for a 64-bit
key.
Enter 13 ASCII characters or 26 hexadecimal digits for a 128-bit
key.
When both WPA encryption and WEP encryption are enabled, only
keys 2 and 3 are available for WEP encryption.
Selects the encryption (transmit) key when WEP encryption is
enabled.
Sets the text to use for WEP key generation.
B
37