Setup Diagram; Getting Started - Planet XRT-104D User Manual

LED
PWR
WAN 100
WAN LNK/ACT
LAN 100
(Port 1-4)
LAN LNK/ACT
(Port 1-4)

1.5 Setup Diagram

Figure 1.2 below shows a typical setup for a Local Area Network (LAN).

1.6 Getting started

This is a step-by-step instruction on how to start using the router and get connected to the
Internet.
1) Setup your network as shown in the setup diagram above (fig 1.2).
Light Status Description
ON Router's power supply is on
ON WAN port 100Mbps is connected
Off WAN port 10Mbps is connected
ON WAN is connected
OFF No WAN connection
Flashing WAN port has Activity (ACT), data being sent
ON LAN port 100Mbps is connected
OFF LAN port 10Mbps is connected
ON LAN is connected
OFF No LAN connection
Flashing LAN port has Activity (ACT), data being sent
Figure 1.2
3