Protocol And Port Binding - Planet XRT-104D User Manual

Click <Save> at the bottom of the screen to save the above configurations and press "Apply and
Reboot" to apply the configuration and reboot the XRT-D router. You can now configure other
advance sections or start using the router (with the advance settings in place).

3.4.5 Protocol and Port Binding

Protocol and Port Binding let you manually bind an application to a WAN port. Only packets that
match all the entered criteria will be bound to the assigned WAN port. You can have to fill all the
items. The items that you leave blank will be ignored.
Parameters
Enable Protocol & Port Binding
Source IP Range
Destination IP Range
Source Port Range
Description
The "Protocol and Port Binding" function is disabled by
default. You can select to enable the "Protocol and Port
Binding" function.
Only packets with this assigned source IP range will
statically bind to the assigned WAN port. If you assign
192.168.0.3 – 192.168.0.5, it means 3 IP addresses:
192.168.0.3, 192.168.0.4 and 192.168.0.5.
Only packets with this assigned destination IP range will
statically bind to the assigned WAN port. If you assign
192.168.02.3 – 192.168.0.5, it means 3 IP addresses:
192.168.0.3, 192.168.0.4 and 192.168.0.5.
Only packets with this assigned destination IP range will
statically bind to the assigned WAN port.
42