Password Settings - Planet XRT-104D User Manual

Parameter
Set Time Zone
Time Server Address
Enable Daylight Savings
Start Daylight Savings Time
End Daylight Savings Time
Click <Save> at the bottom of the screen to save the above configurations and press "Apply and
Reboot" to apply the configuration and reboot the XRT-D router. You can now configure other
advance sections or start using the router (with the advance settings in place).

3.1.2 Password Settings

You can change the password required to log into XRT-D's system web-based management. By
default, the password is "1234". So please assign a password to the Administrator as soon as
possible, and store it in a safe place. Passwords can contain 0 to 30 alphanumeric characters,
and are case sensitive.
Parameters
Current Password
New Password
Description
Select the time zone of the country you are currently in.
The router will set its time based on your selection.
You can manually assign time server address if the
default time server does not work.
The router can also take Daylight savings into account. If
you wish to use this function, you must check/tick the
enable box to enable your daylight saving configuration
(below).
Select the period in which you wish to start daylight
Savings Time.
Select the period in which you wish to end daylight
Savings Time.
Description
Enter your current password for the remote management
administrator to login to your Broadband router.
Note: By default the password is "1234".
Enter your new password
24