Table of Contents
Advertisement
The Quick Setup section is designed to get you using XRT-D as quickly as possible. In the Quick
Setup you are required to fill in only the information necessary to access the Internet. Once you
click on the Quick Setup Wizard in the HOME page, you should see the screen below.
Step 1) Time Zone
The Time Zone allows your router to base its time on the settings configured here, this will affect
functions such as Log entries and Firewall settings.
Parameter
Set Time Zone
Time Server Address
Enable Daylight Savings
Start Daylight Savings Time
End Daylight Savings Time
Click on NEXT to proceed to the next page (step 2) Broadband Type.
Step 2) Broadband Type
Chapter 2 Quick Setup
Description
Select the time zone of the country you are currently in.
The router will set its time based on your selection.
You can manually assign time server address if the
default time server is not workable.
The router can also take Daylight savings into account. If
you wish to use this function, you must check/tick the
enable box to enable your daylight saving configuration
(below).
Select the period in which you wish to start daylight
Savings Time.
Select the period in which you wish to end daylight
Savings Time.
11
Advertisement
Table of Contents
