Indication Of Transferred Calls; Conferencing Calls; Local Conferencing - Mitel 6920 User Manual

Mitel 6920 SIP Phone User Guide

Indication of Transferred Calls

When you transfer an active call, the near-end phone displays a Call Transferred screen when a
call is transferred and the far-end call is dropped. The figure below illustrates the Call Transferred
screen on the 6920 phone.

Conferencing Calls

In the 6920 IP phone, you can create conference calls using the Conf softkey offered on screen
when in a connected call.

Local Conferencing

The 6920 phone supports up to three parties (including yourself) in a conference call. This is called
local conferencing and is the default method of conferencing on the 6920.
Note: Your System Administrator can set your Conference key to speed dial a specific
number. Contact your System Administrator for more information.
Creating a Conference Call Using Local Conferencing
Use the following procedure to create a conference call using local conferencing.
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the
handset or press the
2. Call Party 2 by dialing their number (or answer an incoming call of a party).
cxxiv
key. A line opens up.