Usb Storage Device - Triax S-HD11 User Manual

3.2 USB storage device

Once a USB device is found, the system will initialize the USB device. When complete, the following interface will appear:
A – List Area
C – File Info
If the USB device has more than one partition, all the partitions can be displayed. At present the system support the following partition formats:
FAT and FAT32.
In Multimedia Mode, the interface can be divided into 4 areas (see the figure above):
List Ar List Area (A) ea (A) displays the file and folder list of the current partition or directory.
List Ar List Ar ea (A) ea (A)
•
Preview Area (B) Preview Area (B) Preview Area (B) is used to preview photos. Preview Area (B)
•
File Info Area (C) File Info Area (C) shows the information of the selected media file.
File Info Area (C) File Info Area (C)
•
User Operation Tips Area (D) shows the available keys and their functions. User Operation Tips Area (D)
User Operation Tips Area (D) User Operation Tips Area (D)
•
After entering the Multimedia mode, the highlight is in the area A by default. You can -
Press V+/ V+/ V+/ V+/- - - - keys to switch among the multimedia types to operate.
•
Press CH CH CH CH- - - - key to enter the List Area (A).
•
In the List Area,
press OK OK or V+ V+ keys to enter the current partition or directory;
OK OK V+ V+
•
press V V V V - - - - key to go to the upper level directory;
•
press BACK BACK BACK BACK key to move the highlight back to the area A to select other media type.
•
EN
B – Preview Area
D – User Operation Tips
14
User manual