Transponder List (Tp) - Triax S-HD11 User Manual

User manual
4.1.3
In the Installation menu, press CH+/
page. See the figure below:
The TP List stores the transponders of current satellite of current system. Each transponder may have multiple frequencies. You can press color
function keys on the remote controller to edit the list, for example to add a transponder (by pressing the red function key), to edit a transponder
(by pressing the green function key), to delete a transponder (by pressing the yellow function key), to search transponders (by pressing the blue
function key), etc.
After pressing the green function key, you can edit the selected transponder's detailed information such as frequency, symbol rate and
polarisation. When finished, press OK

Transponder list (TP)

CH+/- - - - keys to highlight the Transponder List item and then press OK
CH+/ CH+/
OK key to exit the editing state.
OK OK
OK or V+
OK OK
21
V+ keys to enter the Transponder List
V+ V+
EN