Triax S-HD11 User Manual page 8

After power on, the system will enter the DVB mode. If there is no program data in the database, the following message will appear:
Method 5: Method 5: Method 5: If you have set favorite programs, press the green function key Method 5:
•
point, you can press CH+/
Pressing back exits the menu
Method 6: Method 6: Method 6: Press the yellow function key while in the state of Fejl! Henvisningskilde ikke fundet. Method 6:
•
name.
The figure below will appear:
Press CH+/ CH+/- - - - / V+/ CH+/ CH+/ / V+/- - - - keys to select a character and then press OK / V+/ / V+/
function key function key to confirm your input. (Pressing the red function key
function key function key
Method 7: Press the blue function key while in the state of Fejl! Henvisningskilde ikke fundet. Method 7
Method 7 Method 7
•
the figure below), which includes free, scramble and so on.
EN
CH+/- - - - keys to select a FAV item and then press OK
CH+/ CH+/
OK key to input. When you have finished inputting a channel name, press the blue OK OK
red function key can change case. Number keys cannot be used to input numbers here.)
red function key red function key
green function key and a Favorite list will appear (see the figure below). At this green function key green function key
OK key to enter its program list.
OK OK
Fejl! Henvisningskilde ikke fundet., and you can search for a channel by Fejl! Henvisningskilde ikke fundet. Fejl! Henvisningskilde ikke fundet.
Fejl! Henvisningskilde ikke fundet., and the channel group list appears (see
Fejl! Henvisningskilde ikke fundet. Fejl! Henvisningskilde ikke fundet.
8
User manual
blue blue blue