Initial Setting; Setting The Imn (Inmarsat Mobile No.) - Furuno FELCOM 15 Installation Manual

3. INITIAL SETTINGS
3.1

Setting the IMN (INMARSAT MOBILE NO.)

After the wiring, set your IMN (Inmarsat Mobile No.) as below.
1. Turn the power on.
2. Press the function key [F8] to show the Setup menu.
File Edit
1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration
3. Press [2] key to display the System Setup menu.
4. Confirm that the IMN is selected, and then press the [Enter] key.
The entering field appears.
5. Key in your IMN.
6. Press the [Enter] key.
7. Press the [Esc] key to disappear the entering field.
8. Press the [Enter] key.
To clear the IMN, press [I] [M] [N] in order while pressing the [Alt] key down at step 5.
Transmit EGC Reports
Setup
Setup menu
Setup
System Setup
System Date & Time
IMN
MES Operation Mode
Nav Port
Active Port
Message Output Port
EGC Output Port
9. Configuration
Network Setup
Command Window
System Setup menu
16
Logs Options Setup Position StopAlarm
01:53 02-02-25 (YY-MM-DD)
INMARSAT-C
OFF
INT
INT
INT