Related Manuals for Furuno AU-217A
Summary of Contents for Furuno AU-217A
- Page 1 FURUNO GNSS ANTENNA AU-217A Parts Number: Hardware Specifications (Document No. SE15-410-002-00)
- Page 2 AU-217A Hardware Specifications SE15-410-002-00 Revision History Version Contents Change Date Initial Release 2015.04.22...
-
Page 3: Important Notice
- SBAS(USA: WASS, Europe: EGNOS, Japan: MSAS, India: GAGAN) Thus FURUNO is not liable for the degradation of the above systems so therefore FURUNO cannot guarantee specification based on their conditions. User is expected to be familiar with the System and make... - Page 4 AU-217A Hardware Specifications SE15-410-002-00 Table of Contents Outlines ························································································································· 1 Product Classification ····································································································· 1 General Specifications ···································································································· 1 Electrical Specification ······························································································· 1 3.1.1 Antenna Element ································································································· 1 3.1.2 LNA ··················································································································· 2 Mechanicals & Environmental Specification ··································································· 2 Drawing ························································································································· 3 Reliability Test ···············································································································...
-
Page 5: Product Classification
AU-217A Hardware Specifications SE15-410-002-00 Outlines AU-217A is a GNSS antenna unit designed for GPS and GLONASS receiver systems. Figure 1.1 shows an antenna block diagram. Antenna Element Low Noise Amplifier (LNA) DC CUT RF OUT & LNA1 LNA2 SAW BPF... - Page 6 AU-217A Hardware Specifications SE15-410-002-00 3.1.2 Table 3.1.2 LNA Item Specification Notes Filtered LNA Frequency 1575 to 1606 MHz Bandwidth Polarization RHCP Gain 40dB min Gain flatness +/- 2 dB 1575 to 1606 MHz >50dB <1500 MHz Out-of-Band Rejection >50dB <1550 MHz >70dB...
-
Page 7: Reliability Test
2 hours of Randome Vibration in all three axes (X,Y and Z) MIL STD 810D, Trans Common Carrier(restrained) Shock test 50G, 11msc. Vertical Axis, all other axes 30G (X and Y) Drop test Drop Height: 50cm x 3times x 2faces(TOP & Bottom) Special Instruction AU-217A complies with RoHS directives.