Samson 3730-2 Mounting And Operating Instructions page 96

Setting with TROVIS-VIEW software – Parameter list
Positioner – Start-up – Initialization
Initialization mode
Device initialized
Initialization
Initialization status
Initialization
canceled
Target operating
mode
Current operating
mode
Initialization error
x > range
Delta x < range
Attachment
Initialization time
exceeded
Initialization/sole-
noid valve
Transit time too short
Pin position
No emergency
mode
Positioner – Start-up – Substitution
Initialized in Sub
mode
Closing direction
Blocking position
96
EB 8384-2 EN
Nominal range Maximum
range
Maximum range
Manual adjust-
ment
Substitution
Automatic Automatic
Manual
SAFE
Alarm
Counter-
clockwise
0.0 %
Code 6
Status of device initialization
Starting of initialization procedure.
The initialization mode parameter must be first
set to the required initialization procedure.
Status of the running initialization procedure
Running initialization procedure has been can-
celed. The control valve moves to its fail-safe
position.
Code 0
Indicates current operating mode of positioner
Code 50
Code 51
Code 52
Code 53
Code 54
Code 55
Code 56
Code 76
Indicates whether the substitute configuration
(sub mode) has been performed
Code 34
Code 35