Samson 3730-2 Mounting And Operating Instructions page 98

Setting with TROVIS-VIEW software – Parameter list
Diagnosis – Status alarms
Status
Condensed status
Operating hours
counter
Device in closed
loop
Device switched on
since last
initialization
Device in closed
loop since last
initialization
Error occured (fault
alarm output)
Solenoid valve
status
Fail-safe position
Device initialized
Start performed
with default settings
Local operation
active
Configuration
changed
Number of zero
calibrations
Number of
initializations
Zero point limit
98
EB 8384-2 EN
Alarm symbol
Display or status
Summarized condensed status.
Made up from various states.
Time elapsed since first initialization
Time elapsed in closed loop since first initializa-
tion
Time elapsed since last initialization
Time elapsed in closed loop since last initializa-
tion
Status of fault alarm output
Status of optional solenoid valve
Fail-safe action of actuator upon air
supply/auxiliary power failure or device
start-up.
Determined during initialization.
Status of device initialization
Indicates whether a start has been performed
with default settings.
Local operation is active
Status of device status bit configuration
changed.
Number of zero calibrations performed since
last initialization
Number of initializations performed
Limit for zero point monitoring