Enabling Cs_Ctl Qos Mode For The Initiator And Target Ports; Verifying And Confirming Cs_Ctl Mode Setup For Each Port; Creating A Virtual Port From The Adapter's Port In Qconvergeconsole Gui - Qlogic QLE2740L-DEL User Manual

3–Fibre Channel Configuration
Configuring CS_CTL QoS

Enabling CS_CTL QoS Mode for the Initiator and Target Ports

Figure 3-33
ports.

Verifying and Confirming CS_CTL Mode Setup for Each Port

Figure 3-34
Figure 3-34. CS_CTL Mode Setup for Each Port
Creating a Virtual Port from the Adapter's Port in
QConvergeConsole GUI
To create a virtual port in QConvergeConsole GUI:
1. In the QConvergeConsole GUI content pane on the left, select the Host tab.
2. On the Host page, expand the adapter node, and then select a port.
3. In the content pane on the right, select the Virtual tab.
4. On the Virtual page under Create New Virtual Port, specify the Number of
vPort to create, and then click Update.
5. Click Create.
shows how to enable CS_CTL QoS mode for the initiator and target
Figure 3-33. Enabling CS_CTL QoS Mode
shows how to verify the CS_CTL mode setup for each port.
82 BK3254601-00 C