Table of Contents
Advertisement
3–Fibre Channel Configuration
Using Fast!UTIL for Custom Configuration
Selectable Boot Settings
The Configuration Settings menu provides access to the Selectable Boot
Settings options. If you enable the Host Bus Adapter BIOS in the adapter
settings, you can select the boot device, as shown in
Enable
Selectable
Boot
No
Yes
Yes
The Selectable Boot Settings option allows you to specify up to four WWPNs or
LUNs as boot devices.
To enable the Selectable Boot option and insert devices into boot device
locations:
1.
On the Configuration Settings menu, select Host Adapter Settings.
2.
Enable the Host Bus Adapter BIOS and then press the ESC key to return
to the Configuration Settings menu.
3.
On the Configuration Settings menu, select Selectable Boot Settings.
4.
To enable or disable (toggle) the Selectable Boot option, press the ENTER
key. To move to the Primary location of the Selectable Boot List menu,
press the DOWN ARROW key.
5.
To see a list of accessible devices (in the Select Fibre Channel Device
menu), press ENTER.
6.
Select a drive by pressing the UP ARROW and DOWN ARROW keys or the
PAGE UP and PAGE DOWN keys to scroll to the device that you want to put
into your Selectable Boot menu list. Then press ENTER to select the
requested device and load it into the Selectable Boot menu list.
Table 3-2. Selectable Boot Settings
Boot
WWPN/
LUN
—
The BIOS configures the first disk drive it finds as the boot
device.
None
The BIOS configures the first disk drive it finds that is also
specified
LUN 0 as the boot device.
Specified
The BIOS scans through the specified boot worldwide port
name (WWPN) and LUN list until it finds a disk drive. This
drive is configured as the boot device.
39
Table
3-2.
Device Boot
BK3254601-00 C
Advertisement
Table of Contents
Troubleshooting
