Continuation Tests (Certain Tests Only) - palintest Photometer 7100 Manual

5 The instrument will take the reading and display the result as follows, for
example :-
The following symbols indicate the result is out of test range :-
6 The 'Options' menu offers the choice to :-
'Choose a Test' - return to the menu of test programs and select another test
'Read'
'Blank'
'Follow-On'

Continuation Tests (Certain Tests Only)

1 Select 'Follow-On' and press [OK] during the result display period of the
foregoing test stage. The 'Insert Sample' screen will appear.
Place SAMPLE TUBE in the test chamber, then press [OK].
2 The instrument will take the reading and calculate the result from the
combination of readings (where appropriate). The result will be displayed
as follows, for example:
3 During the display period, the same options are available as at the end of a
normal test program. Select 'Return' from the 'options menu' to take the
program back to the start of the first stage of a multiple test procedure to
enable further samples to be tested for the same parameters.
Phot 007
Chlorine-Free / 5
1.00
mg/l Cl
Choose a Test
Result is higher than range
Result is lower than range
- read further sample tubes of the currently selected test
- re-blank the instrument
- carry out a continuation test if available.
Phot 008
Chlorine-Total / 5
mg/l Cl
Choose a Test Read
2
Read Blank Follow-On
> >
< <
1.50
2
Blank Return
9