Logic Functions - Zennio MAXinBOX User Manual

MAXinBOX SHUTTER 4CH / 8CH

2.3 LOGIC FUNCTIONS

This module makes it possible to perform numeric and binary operations to incoming
values received from the KNX bus, and to send the results through other
communication objects specifically enabled for this purpose.
MAXinBOX SHUTTER 4CH / 8CH can implement up to 20 different and independent
functions, each of them entirely customisable and consisting in up to 4 consecutive
operations each one.
The execution of each function can depend on a configurable condition, which will be
evaluated every time the function is triggered through specific, parameterisable
communication objects. The result after executing the operations of the function can
also be evaluated according to certain conditions and afterwards sent (or not) to the
KNX bus, which can be done every time the function is executed, periodically or only
when the result differs from the last one.
Please refer to the specific "Logic Functions in MAXinBOX SHUTTER" user manual
(available at the Zennio homepage, www.zennio.com) for detailed information about
the functionality and the configuration of the related parameters.
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
11