Logic Functions - Zennio HeatingBOX 24V 4X User Manual

HeatingBOX

2.3 LOGIC FUNCTIONS

This module makes it possible to perform numeric and binary operations to incoming
values received from the KNX bus, and to send the results through other communication
objects specifically enabled for this purpose.
HeatingBOX can implement up to 10 different and independent functions, each of
them entirely customisable and consisting in up to 4 consecutive operations each one.
The execution of each function can depend on a configurable condition, which will be
evaluated every time the function is triggered through specific, parameterisable
communication objects. The result after executing the operations of the function can also
be evaluated according to certain conditions and afterwards sent (or not) to the KNX
bus, which can be done every time the function is executed, periodically or only when
the result differs from the last one.
Please refer to the specific "Logic Functions" user manual (available in the HeatingBOX
product section at the Zennio homepage, www.zennio.com) for detailed information
about the functionality and the configuration of the related parameters.
http://www.zennio.com Technical Support: http://support.zennio.com
10