Problem
DOUBLE DETECT
The machine keeps turning Double Detect OFF
Double Detect
cannot calibrate
itself properly.
Machine stops for 'doubles' that aren't there or feeds 'doubles'
without stopping
Double Detect is
not turned ON.
Double Detect
is not correctly
calibrated.
SV40221 Rev. A
Remedy
Double Detection might not be
possible with certain very thick
or heavily printed material. Either
change material or choose to run
with Double Detect OFF.
Check Double Detect status.
Double Detect icon
alongside all items where Double
Detect is operational.
Correct loading or have Supervisor
correct Job Definition as necessary.
Run a Trial Piece whenever a
new batch of material is loaded to
recalibrate Double Detect. The new
batch might be of slightly different
thickness.
Troubleshooting • 6
will appear
Page
1-11,
1-12
4-4
3-4
6-7