Omr Marks Available - Pitney Bowes D1500 Operator's Manual

OMR Marks Available

This section gives brief descriptions of the OMR Marks that can be
allocated to an OMR Code and lists the options available for use with
each mark. The section following, OMR Mark Options on page 5-6
then gives greater detail of each option.
NOTE: Some marks within this section are available as added
features which expand OMR capability. Contact your machine
supplier for details. OMR features available will vary depending on
the country you are in.
BM - Benchmark
This is a mandatory mark within the Multi-Mark option, it must be
either the first or last mark of the code and will appear on every page
within the first set.
This mark may only be selected once within the code.
SAF - Safety
This mark improves the integrity of your Mail Piece. It can be placed
anywhere within the code but benefits from being at the opposite end
of the code to the Benchmark.
When the Safety mark is placed in this position with the option
Always Present, and No other marks other than the OMR code
in the margin is chosen when creating the job, the machine will
automatically work out the length of the code. This makes creating
jobs using this code easier. Otherwise, the machine will ask for a
code length when creating a job.
This mark may appear more than once within the code.
Options available:
• Always Present or Never Present
BOC - Beginning of Collation
This mark indicates that it is the first sheet fed within a set. This mark
may only be selected once within the code.
Options available:
• Present or Absent
SV40221 Rev. A
Optical Mark Recognition (OMR) • 5
5-3