Welch Allyn CP 150 Service Manual page 54

50 Disassembly, repair, and reassembly
Reassembly notes
• Use a #2 Phillips bit and a Torque driver calibrated to 5.0 in-lb ± 0.5 in-lb to secure
the LCD frame shoulder screws.
Ensure that the LCD flex cable is not under the LCD frame.
Insert the LCD display into the gasket with the exposed printed circuit board on the
bottom. Verify that the LCD flex cable feeds through the gasket's notched clearance
feature.
Place the LCD frame over the display. Verify that the LCD frame does not cover the LCD
flex cable.
CAUTION The LCD flex cable is extremely fragile and easily damaged. Do
not cause creases that may break the connections.
CP 150 12-lead resting electrocardiograph