Quick Setup - Tenda O6 User Manual

Web UI Functions
When the device works in router mode, the system info is displayed as follows:
Parameter Description (part of): (You can also click
Parameter Description
WAN IP: WAN IP address obtained from the upper DHCP server. When the device works in
router mode, the PoE LAN/WAN port works as WAN port.
WAN Gateway: Gateway address of the device. When the device accesses to an external
network, its data packets are forwarded by this gateway.
Connection Status: Current network connection status of the device.
System Info
Connection Type: Current connection type of the device. The device supports three connection
types, as follows:
 DHCP: WAN port of the device obtains an IP address from the upper DHCP server.
 Static IP: WAN port is connected through fixed IP address, subnet mask, default gateway, and
DNS server information.
 PPPoE: WAN port is dialed up through user name and password.

4.2 Quick setup

This device supports the following operation modes and the default operation mode is AP mode.

AP Mode

Station (Client) Mode

Universal Repeater Mode

WISP Mode

Router Mode
on the upper right page to get help.)
-17-