Web Ui Login; Login - Tenda O6 User Manual

Web UI login

3 Web UI login

3.1 Login

When using the device for the first time, you can log in to its web UI via a browser with default login information.
The default login information includes:
Item
IP Address
Username and Password
To log in to this device:
(Assume that the AP is in factory default state and ensure that your PC is connected to the device.)
1. Set your PC's IP address to 192.168.2.X (2~254).
>> Method 1: Set your PC to Obtain an IP address automatically.
>> Method 2: Manually set your PC to 192.168.2.X (2~254), with a subnet mask of 255.255.255.0. (If the
switch and AP are in the same IP segment, make sure that the switch, AP and PC have different IP addresses).
For detailed steps, see Appendix
Tip
The AP's DHCP server is enabled by default. Once you finished settings on Quick Setup page, the DHCP server
will be disabled automatically.
Default Setting
192.168.2.1
admin
Configure your computer.
Or
- 11 -