Mitsubishi Q62DA User Manual page 55

5 UTILITY PACKAGE (GX Configurator-DA)
5 - 6
(2) Data to be created with the utility package
The data and files shown below that are created with the utility package are also
processed using GX Developer operation. Figure 5.1 shows which operation
processes which data or file.
<Intelligent function module parameters>
(a) This data is created with the automatic refresh setting, and stored in the
intelligent function module parameter file of the project to be created using
GX Developer.
Project
Program
Parameters
(b) Steps 1) to 3) shown in Figure 5.1 are performed using the following
operations.
1) Operating from GX Developer.
[Project]
2) Operating from the utility parameter setting module selection screen.
[File]
3) Operating from GX Developer.
[Online]
module parameters"
Or, operate from the utility parameter setting module selection screen.
[Online]
PLC Parameters
Network Parameters
Intelligent Function Module Parameters
[Open existing project] / [Save project] / [Save project as]
[Open file] / [Save file]
[Read from PLC] / [Write to PLC]
[Read from PLC] / [Write to PLC]
MELSEC-Q
"Intelligent function
5 - 6