Network Test; Network Load - Speco N8NXP User Manual

-Private address space

Like the single broadcast address of RFC1918

Can not be used in Internet transmission

Used for multiple cast broadcast in limited space.
Other than the addresses mentioned above, other addresses are permitted. For example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 3666.

4.10.2 Network Test

4.10.2.1 Network Test
Go to Main menu->System Info->Network->Test shown in Figure 4-74.

Destination IP: Enter a valid IPV4 address or domain.

Test: The test results can display average delay and packet loss rate. View the network status.

Network Analyzer Backup: Insert a USB drive and click the Refresh button to view the device. Use the
dropdown list to select the device. Click the Browse button to select the path.
Click the button
operations will be backed up. Please go back to the interface and click
packets to the specified path.

4.10.2.2 Network Load

on the right panel to begin the network packet analyzer. At this point, all network
Figure 4-74
to stop. System will save the
79