4.5 Camera
4.5.1 Camera Setup
Note: For Speco's IP cameras, the built-in PoE ports support plug and play. In order to this feature to work,
the IP camera's user ID and password must be kept at the default values, which are admin and 1234,
respectively.
Go to Main menu->Setting->Camera->Camera to open the camera setup interface.
Device search: Click the button to search for all network cameras in the same network segment.
Status: Red circle (
channel has video.
IP address: Displays the network camera IP address.
Type: The
icon means the camera is connected to the POE port.
Add/Delete: Click
Manual Add: Click the Manual Add button to manually enter camera information and assign it to a
channel. The interface is shown below:
) means the current channel has no video, green circle (
to delete the device, click
to add the device to the NVR.
) means the current
27