Speco NS Series Quick Setup Manual

Quick Setup Guide

Speco Technologies NS Series NVRs
Please go to www.specotech.com/software-updates.html for the latest software
Congratulations
on purchasing your new NS NVR.
We hope that this Quick Setup Guide will help you quickly setup
and configure your new Speco Technologies NVR.
Thank you!

Product Components

NS Series
Remote Control
Remote Battery 1.5V (AAA x 2EA)
Quick Setup Guide
Speco Technologies NS Series NVRs
Please go to www.specotech.com/software-updates.html for the latest software
Congratulations on purchasing your new NS NVR.

Internal Connections

EZ Network

(Internet Connected) EZ Network (Not Connected to the Internet)
We hope that this Quick Setup Guide will help you quickly setup N4NS, N8NS, N16NS
and configure your new Speco Technologies NVR.
Thank you! 5
Product Components 1 4 7 6 8 10 12 15
11 16
NS Series N4NSP
3
2
1 5 7 6 8 10 12 14 1. Under EZ Setup, select EZ Network for Network Setup
11 13 15 2. Select NO if the NVR is not using an internet connection.
Remote Control N8NSP, N16NSP 2. Select Auto Configuration Select (DHCP) or Manual
Remote Battery 1.5V (AAA x 2EA) 3 3. Select OFF for ENABLE DDNS and click NEXT button. Configuration (STATIC) and then click TEST button.
1 2 5 7 6 9 10 14 12 4. Click FINISH to save the setup.
8 14
11 13 15
2. PoE POWER: DC48V input. (NSP Models) 1. Ground: Use for ground port.

EZ Camera

3. PoE PORTS: N4NSP (4 Port PoE), N8NSP & N16NSP (8 Port PoE)
Quick Setup Guide Quick User Guide 4. ETHERNET PORT2: Secondary Network Terminal.
(NS Series without PoE)
Mouse for D4RS / D8RS / D16RS 5. AUDIO IN/OUT: 4 Connectors for Audio Input / 1 Connector for Audio Output.
6. CVBS OUT: HDMI output port. Connector to the HDMI Monitor.
7. HDMI OUT: Main Video Output (1280x720, 1920x1080).
Software & Manual CD 8. VGA OUT: Connector for VGA Monitor.
9. RS232C: POS Interface (TBD). 1. Under EZ Setup, select EZ Network for Network Setup 2. Select YES if the NVR is using an internet connection.
10. E-SATA: 1 External SATA Terminal. 11. USB PORT: USB Ports for Mouse or USB Flash Drive . 3. Select Auto Configuration (DHCP) or Manual Configuration
Screws (x 6EA) Rack mounts ears (x 2EA) 12. ETHERNET PORT1: RJ-45 Connector for Primary Network. (STATIC) and then click TEST button. It will automatically
13. Audio 5~16: More audio inputs for N8NSP, N16NSP. 4. Setup DDNS setting. DDNS (Dynamic Domain Name System) setup the network setting for the system (NVR).
Adaptors (DC12V 5A, DC48V 2A) 14. SENSOR IN, ALARM OUT, RS-485: 4 sensor inputs; allows a DNS name to be constantly synchronized
& Power cables (110V or 220V) 15. POWER: DC12V input for NVR. 1 alarm output and RS-485 for PTZ. with a dynamic IP address. It allows using a dynamic IP address to be 1. In the EZ Setup window, select EZ Camera for Date/Time and
associated with a static domain name. Refer to the full version manual for more information. Camera Setup and click on NEXT.

Power on the DVR

EZ Setup

5.Click FINISH to save the setup. 3. Setup the DATE DISPLAY FORMAT, DAYLIGHT SAVINGS and 2. The description about EZ Camera Setup procedure is then displayed.
• Please follow the proper power on procedures • To start the EZ Setup, right click on the mouse and select DATE & TIME.
to avoid damaging the NVR. EZ SETUP from the submenu. 4. Click on NEXT to enter the EZ Camera Setup.
• Connect all necessary components, e.g. monitor and cameras, • Enter username and password. 5. Select the IP Camera VENDOR
before powering the NVR. • Check the type of power source before connecting the power adaptor The default username is admin and password is 1111. • It is strongly suggested to change the password to 6. Click on SCAN to search the network for cameras. 7. Once the IP Camera information is added for the channel, click on
to the NVR. Only use the power supply that is included with the unit. prevent unauthorized access. PREVIEW to verify video
• It is recommended that the Adaptors are connected to the 8. Click OK and EZ Camera Setup has completed.
NVR before powering up unit.
Rev. 5/21/13
Quick Setup Guide User Guide
Mouse for N4NS, N8NS, N16NS
N4NSP, N8NSP, N16NSP
Software & Manual CD
Rack mounts ears (x 2EA)
Screws (x 6EA)
Adaptors (DC12V 5A, DC48V 2A),
Power cables (110V or 220V) &
Audio cable (N8NSP, N16NSP)
Power on the DVR
• Please follow the proper power on procedures
to avoid damaging the NVR.
• Connect all necessary components, e.g. monitor and cameras,
before powering the NVR.
• Check the type of power source before connecting the power adaptor
to the NVR. Only use the power supply that is included with the unit.
• It is recommended that the Adaptors are connected to the
NVR before powering up unit.
1305-056
Internal Connections
N4NS, N8NS, N16NS
5
6 7
4 10
1 8 12
11
N4NSP
3
2
5 6 7 10 12
1
8
11
N8NSP, N16NSP
3
13
9
5
2 6 7 12
10
1
8
11
1. Ground: Use for ground port.
2. PoE POWER: DC48V input. (NSP Models)
3. PoE PORTS: N4NSP (4 Port PoE), N8NSP & N16NSP (8 Port PoE)
4. ETHERNET PORT2: Secondary Network Terminal.
(NS Series without PoE)
5. AUDIO IN/OUT: 4 Connectors for Audio Input /
1 Connector for Audio Output.
6. CVBS OUT: HDMI output port. Connector to the HDMI Monitor.
7. HDMI OUT: Main Video Output (1280x720, 1920x1080).
8. VGA OUT: Connector for VGA Monitor.
9. RS232C: POS Interface (TBD).
10. E-SATA: 1 External SATA Terminal.
11. USB PORT: USB Ports for Mouse or USB Flash Drive .
12. ETHERNET PORT1: RJ-45 Connector for Primary Network.
13. Audio 5~16: More audio inputs for N8NSP, N16NSP.
14. SENSOR IN, ALARM OUT, RS-485: 4 sensor inputs;
1 alarm output and RS-485 for PTZ.
15. POWER: DC12V input for NVR.
EZ Setup
• To start the EZ Setup, right click on the mouse and select
EZ SETUP from the submenu.
• Enter username and password.
The default username is admin and password is 1111.
• It is strongly suggested to change the password to
prevent unauthorized access.
EZ Network
(Internet Connected)
14
15
14
15
14
15
1. Under EZ Setup, select EZ Network for Network Setup
2. Select YES if the NVR is using an internet connection.
3. Select Auto Configuration (DHCP) or Manual Configuration
(STATIC) and then click TEST button. It will automatically
setup the network setting for the system (NVR).
4. Setup DDNS setting. DDNS (Dynamic Domain Name System)
allows a DNS name to be constantly synchronized
with a dynamic IP address. It allows using a dynamic IP address to be
associated with a static domain name. Refer to the full version manual
for more information.
5.Click FINISH to save the setup.
EZ Network
(Not Connected to the Internet)
1. Under EZ Setup, select EZ Network for Network Setup
2. Select NO if the NVR is not using an internet connection.
2. Select Auto Configuration Select (DHCP) or Manual
Configuration (STATIC) and then click TEST button.
3. Select OFF for ENABLE DDNS and click NEXT button.
4. Click FINISH to save the setup.
EZ Camera
1. In the EZ Setup window, select EZ Camera for Date/Time and
Camera Setup and click on NEXT.
2. The description about EZ Camera Setup procedure is then displayed.
3. Setup the DATE DISPLAY FORMAT, DAYLIGHT SAVINGS and
DATE & TIME.
4. Click on NEXT to enter the EZ Camera Setup.
5. Select the IP Camera VENDOR
6. Click on SCAN to search the network for cameras.
7. Once the IP Camera information is added for the channel, click on
PREVIEW to verify video
8. Click OK and EZ Camera Setup has completed.
Rev. 5/21/13