Table of Contents
Advertisement
Please refer to the following table for parameter information.
Parameter
Device
search
Add
Modify
Delete
Manual
Add
Figure 5-17
Function
Click to search for all IP cameras on the network.
Select a device in the list and then click Add to add the camera to the
system.
Click
for any device in the Added device list to can change the
corresponding remote channel setup.
Click
to delete the remote connection of the corresponding
channel.
Figure 5-17. Add a camera manually. Specify the IP address, RTSP
port, HTTP, user name, and password.
Note:
Multiple protocols are supported. Speco A is the main protocol
for Speco's IP cameras. For certain cameras that have additional
capabilities, the Speco B protocol can be used for more control
through the NVR. This includes changing image settings, video
loss detection, tampering detection, camera offline detection,
and camera firmware upgrade
113
Advertisement
Table of Contents
