View And Set Https Port; Login - Speco N8NXP User Manual

Click Finish and the system will pop up a security warning box. See Figure 5-39.
Click Yes to finish. See Figure 5-40.

5.7.2.10.3 View and set HTTPS port

In Setup->Network->Connection, the HTTPS port can be set.
The default HTTPS port value is 443.

5.7.2.10.4 Login

Open the browser and enter the IP address as: https://xx.xx.xx.xx:port.
xx.xx.xx.xx: is the device IP or domain mane.
Port is the HTTPS port. If using the default HTTPS value 443, the port information does not need to be
added.
If setup was done correctly, the login page will be loaded.
Figure 5-39
Figure 5-40
125