Snapshot; Schedule; Schedule Recording - Speco N8NXP User Manual

4.6.1.2 Snapshot

For supported camera models, the snapshot mode, picture size, quality and frequency can be set. See
Figure 4-25.

Channel: Select applicable channel

Mode: There are two modes: schedule and event. If you select schedule mode, you need to set the
snapshot frequency. If you select event mode, you need to set an event trigger (Under Setup -> Event).

Image size: Set the snapshot picture size.

Quality: Set the snapshot quality. The value ranges from 1 to 6 with 6 being the highest

Snapshot Frequency: Used to set snapshot interval for schedule mode.

4.6.2 Schedule

4.6.2.1 Schedule Recording

To set up schedule recording, go to Main Menu->Setup->Storage->Schedule. See Figure 4-29.
 Channel: Select the desired channel number first. You can select "all" if you want to set the schedule for
all of the channels.

: Select icon
simultaneously.

: Click to delete the schedule for the selected recording type from one period.

Recording Type: Check the box of the desired recording type. There are three modes for recording:
Continuous / Motion detection / Sensor.

Week day: There are eight options: ranges from Saturday to Sunday and all.

Holiday: Special schedules can be set for holidays if needed. Holidays must be added manually. To add
a holiday, go to Main Menu->Setup->System->General->Holiday. This option will not be shown if no
holidays have been added.
Figure 4-25
of multiple days to link them together. This will allow the linked days to be edited
40