Image - Speco N8NXP User Manual

4.5.2 Image

Go to Main Menu->Setup->Camera->Image. The interface is shown below in Figure 4-12.
Note: This section is available for configuration only for supported cameras. For non-supported cameras,
the options will not be visible.

Channel: Select the desired channel from the dropdown list.

Saturation: For changing the saturation value of the camera. The value ranges from 0 to 100. The
default value is 50. The colors will become more saturated as the value is increased. Saturation has no
effect on the general brightness of the video. The recommended range is from 40 to 60.

Brightness: For changing the brightness value of the camera. The value ranges from 0 to 100. The
default value is 50.

Contrast: For changing the contrast value of the camera. The default value is 50. The recommended
value is from 40 to 60.

Auto Iris: When you disable this function, the iris is at the max. This option is on by default.

Mirror: Horizontal flip.

Flip: To flip the video vertically or 90°.

BLC: Depending on the camera model, this may include the following options: BLC/WDR/HLC/OFF.

Profile: To set the white balance mode of the camera. This has an effect on the general hue of the video.
This function is on by default.

Auto: Auto white balance is on. System can auto compensate the color temperature to make sure the
video color is proper.

Sunny: The threshold of the white balance is in the day mode.

Night: The threshold of the white balance is in the night mode.

Customized: You can set the gain of the red/blue channel. The value ranges from 0 to 100.

Day/night. To set color or monochrome mode for the camera. The default setup is auto.

Color: Camera video stays in color.

Auto: Camera switches to monochrome in low light.

B/W: Camera video stays in monochrome.
Figure 4-12
29