Network Port And Web Port; Setup - User Management Mode - Speco N8NU User Manual

Item
Enable DDNS
Host Name
Submit/Update
ezDDNS

4-6-3. Network Port and Web Port

Connecting NVR through a common IP sharing device, each NVR must be assigned a unique TCP port
number for access from outside the LAN. This port number is displayed on NETWORK>NETWORK PORT
Setup MENU.
NOTE:
If you access the NVR only within the same LAN, the TCP port number does not need to
be changed.
Network access beyond a router
To access NVR beyond a router (firewall), you must open the proper TCP ports for live/playback streaming,
for commands, for remote backup, and for audio streaming. If these ports are not opened properly, you
can't access the NVR beyond a router.
o For live/playback streaming, for commands, for remote backup: Open the port number
on NETWORK>NETWORK PORT menu. The default port number is 5445.
o For bi-directional audio: Open the port number on NETWORK AUDIO PORT. The default
port number is [NETWORK PORT number + 1].
o For web-viewer downloading and remote firmware upgrading: Open the port number on
NETWORK>WEB PORT menu. The default port number is 80.
o For IP Camera Setup through web viewer: Forward ports 59011 ~ 59254 to the NVR.
4-7. Setup – User Management Mode
In the Setup menu, select the User Management tab. Then, the User Management menu is displayed as
pictured below. Navigate through the menu items or change the settings using the mouse or the remote
control.
Figure 4.6.2. Network Setup Screen – DDNS
Table 4.6.2. DDNS
Turn DDNS on/off
This item allows the user to setup a domain name manually,
using virtual keyboard displays as shown.
When manual host name input is done, move the cursor to this
item and select ON to submit the settings.
Enable/disable ezDDNS to register the host name automatically.
Description
48