Advertisement
software.
10. The following dialog box may appear, as shown below. Click the 'OK' button to
continue.
All Sealevel Systems software drivers have been fully tested by Sealevel. Clicking 'OK'
will not harm your system.
11. The following dialog box may appear, as shown below. Click the 'OK' button to
continue.
This is a notification that if you are upgrading from a previous driver version, you
should remove the associated Device Manager hardware entries and reinstall the adapter
after the installing the SeaCOM software.
12. The setup file will automatically detect the operating environment and install the
proper components. Next follow the information presented on the screens that
follow. Once the installation is complete, close the disk installation window.
13. Refer to the Physical Installation section to connect and install your adapter.
©Sealevel Systems, Inc.
SL9219 – 04/2013
7804e Manual
12
Advertisement
