Remote Control Of Other Components; Setting Up The Remote Control To Control Other Components - Pioneer Elite VSX-37TX Operating Instructions Manual

Remote Control of Other Components

Setting Up the Remote Control to Control Other
Components
In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV,
LD, CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and
buttons, you only need to use one remote control. If your component(s) are listed in the remote control's
memory, simply follow the steps below. If your component(s) are not listed, or if you want the remote to learn
additional operations, you can use the learning mode to input the information from the remote controls supplied
with your other components.
Recalling Preset Codes
The following steps show you how to recall preset codes stored in the remote control. Once a preset code is
recalled and the component assigned, you can use this remote to easily operate the component. See "Preset
Code List" on page 85 for the components and manufacturers available.
Î
S0URCE
MULTI
OPERATION
DVD/LD TV/SAT
MULTI CONTROL
MD/
CD
TAPE1
CLASS MPX
¶ 7
- +
TUNING
1 ¡
DTV ON/OFF DTV MENU
3
1
4
7
GUIDE GUIDE
+10 +10
+
TV VOL TV CONTROL
–
REMOTE SETUP
2,3
INPUT
ATT
SYSTEM SETUP
EFFECT/
CH SEL
DIGITAL
NR
MULTI CH
MIDNIGHT
INPUT
LIGHT THX
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
58
1
1 Set the remote control slide switch to
USE SETUP
RECEIVER
SYSTEM
OFF
VCR1 VCR2
TUNER TVCONT
BAND DIRECT ACCESS
3 8
- +
2 Press the REMOTE SETUP (INPUT ATT)
STATION
4 ¢
- +
CHANNEL
2 3
5 6
8 9
EXIT EXIT
0
ENTER ENTER
DISC DISC
+
TV
VOLUME
–
TV FUNC
MENU MUTE
+
FUNCTION
ENTER
SIGNAL
–
SELECT
STEREO/
DSP
DIRECT
/ DTS / DTS
ADVANCED ADVANCED
STANDARD
3 Press the REMOTE SETUP button and
SETUP.
Also make sure that your TV is on and set to the receiver.
button.
The REMOTE SET UP menu appears on your TV screen.
Select Remote
Setup Mode
Remote SETUP+1
Preset Recall
Remote SETUP+2
Learning
Remote SETUP+3
Multi-Operation
Remote SETUP+4
Direct Function
You have four setup options:
1 Preset Recall
2 Learning
3 Multi Operation (See p.71)
4 Direct Function (See p.74)
Preset Recall and Learning are the two modes that teach the
remote control to operate your other components. It's easiest
to start with Preset Recall and, if setup isn't possible for certain
components, move on to the Learning mode.
the same time to select the preset recall
setup mode.
All the MULTI CONTROL buttons (except the TUNER button)
start to blink.
To cancel the preset recall setup mode press REMOTE SET
UP.
at
1