Remote Control Of Other Components; Setting Up The Remote To Control Other Components; Recalling Preset Codes - Pioneer Elite VSX-24TX Operating Instructions Manual

Remote Control of Other components

Setting Up the Remote Control to Control Other Components
In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV, LD,
CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and buttons, you
only need to use one remote control. If your component(s) are listed in the remote control's memory, simply follow the
steps below. If your component(s) are not listed, or if you want the remote to learn additional operations, you can use
the learning mode to input the information from the remote controls supplied with your other components.

Recalling preset codes

The following steps show you how to recall preset codes stored in the remote control. Once a preset code is recalled
and the component assigned, you can use this remote to easily operate the component.
memo
See "Preset Code List" on p. 75 for the components and manufacturers available.
S0URCE
MULTI
OPERATION
DVD/LD TV/SAT
MULTI CONTROL
MD/
CD
TAPE1
CLASS MPX
¶ 7
- +
TUNING
1 ¡
DTV ON/OFF DTV MENU
3
1 2
5
4
7 8
GUIDE
0
+10
TV
TV VOL
TV CONTROL
TV FUNC
EFFECT
MENU
/CH SEL
ENTER
SYSTEM
THX
SETUP
2,3
REMOTE
MIDNIGHT
SETUP
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
48
1
Î
RECEIVER
1
SYSTEM
OFF
VCR1 VCR2
TUNER TVCONT
2
BAND DIRECT ACCESS
3 8
- +
STATION
4 ¢
- +
CHANNEL
3
6
9
EXIT
ENTER
DISC
VOLUME
MUTE
FUNCTION
SIGNAL
SELECT
/dts
ADVANCED STANDARD
DSP STEREO
DIGITAL NR
3
Turn on your TV and the receiver.
Make sure your TV is set to the appropriate video input (e.g.
VIDEO 1).
Press REMOTE SETUP.
The REMOTE SET UP menu appears on your TV screen.
Select Remote
Setup Mode
Remote SETUP+1
Preset Recall
Remote SETUP+2
Learning
Remote SETUP+3
Multi-Operation
Remote SETUP+4
Direct Function
You have four set up options:
1 PRESET RECALL
2 LEARNING
3 MULTI OPERATION (See p.63)
4 DIRECT FUNCTION (See p.65)
PRESET RECALL and LEARNING are the two modes that teach
the remote control to operate your other components. It's
easiest to start with PRESET RECALL and, if set up isn't possible
for certain components, move on to the LEARNING mode.
Press REMOTE SETUP and
select the PRESET RECALL SETUP mode.
All the MULTI CONTROL buttons (except the TUNER button)
start to blink.
To cancel the PRESET RECALL SETUP mode
Press REMOTE SET UP.
1 at the same time to