Pioneer Elite VSX-37TX Operating Instructions Manual page 61

Î
USE SETUP
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1 VCR2
MULTI CONTROL
MD/
CD TUNER TVCONT
TAPE1
CLASS MPX BAND DIRECT ACCESS
¶ 7 3 8
- + - +
STATION
TUNING
1 ¡ 4 ¢
- +
DTV ON/OFF DTV MENU CHANNEL
1 2 3
4 5 6
5
7 8 9
GUIDE EXIT
0
ENTER
+10 DISC
+ +
TV
TV VOL TV CONTROL VOLUME
– –
TV FUNC
REMOTE SETUP
INPUT
MENU
MUTE
ATT
SYSTEM SETUP
+
EFFECT/ FUNCTION
CH SEL
ENTER
DIGITAL SIGNAL
–
NR SELECT
MULTI CH STEREO/
MIDNIGHT DSP
INPUT
DIRECT
/ DTS
ADVANCED
LIGHT THX STANDARD
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
Remote Control of Other Components
5 Press the button to be programmed.
The MULTI CONTROL button lights steadily.
• The TV POWER, TV FUNC and TV VOL +/– buttons are only
available for learning when programming TV CONTROL
operations.
6 Point the remote controls at each other and
press the button on the other remote
control for the operation you wish to
program.
1 Point the remote controls toward each other.
7
2 Hold down the button on the other remote control corre-
sponding to the operation you wish to program. Release
when the MULTI CONTROL button on the receiver's remote
control starts blinking.
(The MULTI CONTROL button blinks to indicate that the
operation has been learned.)
To program additional operations for the current
component, repeat steps 5 and 6.
To program operations for another component, repeat
steps 4 through 6.
7 Press the REMOTE SETUP button to exit the
learning setup mode.
The remote control and TV return to their previous operation
modes.
• When you're done setting up, remember to set the slide
switch back to USE.
2-8 inches
(5-20 cm)
61