Page 1
• Receive free tips, updates and service bulletins on your new product • Improve product development Your input helps us continue to design products that meet your needs. • Receive a free Pioneer newsletter Registered customers can opt in to receive a monthly newsletter. Operating Instructions...
Page 2
IMPORTANT CAUTION Read these instructions. Only use attachments/accessories specified by RISK OF ELECTRIC SHOCK the manufacturer. Keep these instructions. DO NOT OPEN Use only with the cart, stand, tripod, bracket, or Heed all warnings. table specified by the manufacturer, or sold with The lightning flash with arrowhead symbol, CAUTION: The exclamation point within an equilateral...
Page 3
The Safety of Your Ears is in Your Hands IMPORTANT NOTICE Get the most out of your equipment by playing it at a THE MODEL NUMBER AND SERIAL NUMBER OF safe level a level that lets the sound come through THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
Thank you for buying this Pioneer product. Please read through these operating instruc- 05 Basic playback Playing a source ................................44 tions so you will know how to operate your model properly. Playing an iPod .................................45 Contents Playing a USB device ...............................46 Playing an MHL-compatible device ..........................47...
Page 5
10 Controlling the rest of your system 14 Additional information About the Remote Setup menu............................76 Surround sound formats ...............................109 Operating multiple receivers ............................76 SABRE DAC .................................109 Setting the remote to control other components ......................76 About HDMI ..................................109 Selecting preset codes directly ............................76 HTC Connect ...................................109 Programming signals from other remote controls .......................77 About iPod ..................................110...
Page 6
Flow of settings on the receiver The Input Setup menu (page (When using connections other than the recommended connections) 10 Basic playback (page Flow for connecting and setting the receiver The unit is a full-fledged AV receiver equipped with an abundance of functions and terminals. It can be used eas- 11 Adjusting the sound and picture quality as desired ily after following the procedure below to make the connections and settings.
Page 7
Before you start Features ............................8 Checking what’s in the box ......................10 Installing the receiver ........................10 Loading the batteries ........................10 Operating range of remote control unit ..................11...
Jitterless high quality playback is possible by connecting a PQLS-compatible player with HDMI connections. This By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. feature is only available when the connected Pioneer Blu-ray Disc Player supports the PQLS function. Connectivity...
Page 9
Before you start Playback/Processing Installation Multi-channel Music File playback Built-in AVNavigator This receiver enables multi-channel music file playback with a resolution of up to 96 kHz/24 bit. Playback of WAV When accessing the receiver from the browser of your smartphone, tablet, Windows PC or Mac, you can use and FLAC files via the front USB port and network is supported.
Unauthorized transfer, duplication, broadcast, public transmission, translation, sales, lending or other such matters that go beyond the scope of “personal use” or “citation” as defined by Copyright Law may be subject to punitive actions. Permission to use this CD-ROM is granted under license by PIONEER HOME ELECTRONICS CORPORATION.
Before you start Operating range of remote control unit The remote control may not work properly if: ! There are obstacles between the remote control and the receiver’s remote sensor. ! Direct sunlight or fluorescent light is shining onto the remote sensor. ! The receiver is located near a device that is emitting infrared rays.
Page 12
Controls and displays Remote control ..........................13 Display ............................15 Front panel ............................. 16...
Controls and displays The remote has been conveniently color-coded according to component control using the following system: Remote control ! White – Receiver control, TV control ! Blue – Operation of other devices and each input (TUNER, etc.) (See pages 45, 46, 48, and 79.) This section explains how to operate the remote control for the receiver.
Page 14
Controls and displays 13 Remote control LED Lights when a command is sent from the remote control. 14 SUB ZONE CONTROL buttons ! Z2 (ZONE 2) – Holding down this button (for 1.5 seconds) until the remote control LED flashes one time, the mode changes to Zone 2 operation.
Controls and displays Listening mode indicators Display ! ALC – Lights when the ALC (Auto level control) mode is selected (page 52). ! AUTO SURROUND – Lights when the Auto Surround feature is switched on (page 52). ! STREAM DIRECT – Lights when Direct/Pure Direct is selected (page 53).
Controls and displays 10 MCACC SETUP MIC jack Front panel Use to connect the supplied microphone (page 38). 11 SPEAKERS Use to change the speaker terminal (page 71). 12 Listening mode buttons ! AUTO SURR/ALC/STREAM DIRECT – Switches between Auto Surround (page 52), Auto Level Control and Stream Direct mode...
Page 17
Connecting your equipment Connecting your equipment ......................18 Rear panel ............................18 Determining the speakers’ application ..................19 Placing the speakers ........................21 Connecting the speakers ....................... 21 Installing your speaker system ..................... 22 Selecting the Speaker system ....................... 23 About the audio connection ......................
Connecting your equipment Connecting your equipment Note This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This chapter The input functions below are assigned by default to the receiver’s different input terminals. Refer to The Input explains the kinds of components you can connect to make up your home theater system.
Connecting your equipment [B] 7.2 channel surround system (Front wide) Determining the speakers’ application ! Speaker System setting: Normal(SB/FW) This unit permits you to build various surround systems, in accordance with the number of speakers you have. ! Be sure to connect speakers to the front left and right channels (L and R). ! It is also possible to only connect one of the surround back speakers (SB) or neither.
Page 20
Connecting your equipment [D] 5.2 channel surround system & Front Bi-amping connection (High quality [F] 5.2 channel surround system & HDZONE connection (Multi Zone) surround) ! Speaker System setting: HDZONE With these connections you can simultaneously enjoy 5.2-channel surround sound in the main zone with stereo ! Speaker System setting: Front Bi-Amp playback on another component in HDZONE.
Connecting your equipment Placing the speakers Connecting the speakers Refer to the chart below for placement of the speakers you intend to connect. Each speaker connection on the receiver comprises a positive (+) and negative (–) terminal. Make sure to match these up with the terminals on the speakers themselves.
Connecting your equipment Bi-amping your speakers Installing your speaker system Bi-amping is when you connect the high frequency driver and low frequency driver of your speakers to different At the very least, front left and right speakers only are necessary. Note that your main surround speakers should amplifiers for better crossover performance.
Connecting your equipment Bi-wiring your speakers Bi-Amping setup Your speakers can also be bi-wired if they support bi-amping. Bi-amping connection of the front speakers for high sound quality with 5.1-channel surround sound. ! With these connections, the Speaker System setting makes no difference. Connect bi-amp compatible speakers to the front and surround back speaker terminals.
Connecting your equipment About the video converter About HDMI The video converter ensures that all video sources are output through the HDMI OUT terminal. The HDMI connection transfers uncompressed digital video, as well as almost every kind of digital audio. If the TV is only connected to the receiver’s composite VIDEO MONITOR OUT jacks, all the other video devices This receiver incorporates High-Definition Multimedia Interface (HDMI ®...
Connecting your equipment ! When connecting to an HDMI/DVI-compatible monitor using the HDMI OUT 2 terminal, switch the HDMI Connecting your TV and playback components output setting to OUT 2 or OUT 1+2. See Switching the HDMI output page Also, MAIN/HDZONE must be set to MAIN beforehand (page 94).
Page 26
Connecting your equipment ! With factory default settings, video from the video cable or component cable will not be output from the HDMI Connecting your DVD player with no HDMI output terminal. To output video, you must switch video input to the device connected with the video cable or compo- This diagram shows connections of a TV (with HDMI input) and DVD player (or other playback component with no nent cable and set V.CONV to ON (page...
Connecting your equipment ! In order to listening to HD audio with this receiver, connect an HDMI cable, and use analog video cable for Connecting your TV with no HDMI input video signal input. This diagram shows connections of a TV (with no HDMI input) and DVD player (or other playback component) to Depending on the player, it may not be possible to output video signals to both HDMI and other video output the receiver.
Connecting your equipment ! When the network function or iPod/USB input is selected with HDZONE, video connected with the video cable Connecting other audio components or component cable is not output from the HDMI terminal. To output video, turn off HDZONE or set HDZONE to some other input (page 72).
Connecting your equipment Connecting additional amplifiers Connecting AM/FM antennas This receiver has more than enough power for any home use, but it’s possible to add additional amplifiers to front Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, and subwoofer channels of your system using the pre-outs.
Connecting your equipment Connecting external antennas MULTI-ZONE setup To improve FM reception, connect an external FM antenna to FM UNBAL 75 W. This receiver can power up to three independent systems in separate rooms after you have made the proper MULTI-ZONE connections.
Page 31
Connecting your equipment Basic MULTI-ZONE setup (ZONE 2) MULTI-ZONE setup using HDMI terminal (HDZONE) Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver. You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration. Important ! The settings must be changed at ZONE Setup in order to use the HDZONE function (page...
Connecting your equipment Multi-zone connection using the HDMI terminal and speaker terminals (HDZONE) Connecting to the network through LAN interface By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen Important to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
! The Bluetooth wireless technology enabled device must support A2DP profiles. HDMI 5 INPUT ! Pioneer does not guarantee proper connection and operation of this unit with all Bluetooth wireless technology F O F d Ph enabled devices.
Connecting your equipment Connecting an MHL-compatible device Connecting to a wireless LAN An MHL-compatible mobile device can be connected to enjoy 3D/Full-HD videos, high quality multi-channel Wireless connection to the network is possible through a wireless LAN connection. Use the separately sold audio, and photos etc., with charge the battery on the receiver.
A damaged power cord can cause a fire or give you an electric shock. Check the power cord once sensor on the front panel. in a while. If you find it damaged, ask your nearest Pioneer authorized independent service company for a Connect the IR receiver sensor to the IR IN jack on the rear of this receiver.
Page 36
Basic Setup How to use the built-in AVNavigator ..................37 Automatically conducting optimum sound tuning (Full Auto MCACC) ........38 The Input Setup menu ........................40 Operation Mode Setup ......................... 41 Changing the OSD display language (OSD Language)............... 41 About the Home Menu ......................... 42...
Basic Setup ! On a Mac, launch Safari and click <VSX-1124> displayed in ‘Bonjour’ on the Bookmarks bar. How to use the built-in AVNavigator The built-in AVNavigator is equipped with Wiring Navi, which allows you to perform connection of this receiver and initial settings in interactive mode.
Basic Setup ! When using an Android device, from Google Play Store, download iControlAV5, which is a free application. After launching iControlAV5, follow the instructions on the screen. After that, on the Home screen, tap the CAUTION icon. ! The test tones used in the Full Auto MCACC Setup are output at high volume. Press u STANDBY/ON to switch on the receiver and your TV.
Page 39
Basic Setup Press MAIN RECEIVER then select START. The Full Auto MCACC Setup procedure is completed and the Home Menu menu reappears automatically. Follow the instructions on-screen. Be sure to disconnect the microphone from this receiver upon completion of the Full Auto MCACC Setup. Make sure the microphone is connected, and if you’re using a subwoofer, make sure it is switched on and set to a The settings made in the Full Auto MCACC Setup should give you excellent surround sound from your system, comfortable volume level.
Basic Setup Input function default and possible settings The Input Setup menu The terminals on the receiver generally correspond to the name of one of the input functions. If you have con- You only need to make settings in the Input Setup menu if you didn’t hook up your digital equipment according nected components to this receiver differently from (or in addition to) the defaults below, see The Input Setup to the default settings (see...
Basic Setup Operable settings/items Descriptions Page Operation Mode Setup Other functions This receiver is equipped with a great number of functions and settings. The Operation Mode feature is provided INPUT SELECT (INPUT SELECTOR) Switches the input. for users who find it difficult to master all these functions and settings. VOLUME +/–, MUTE Use to set the listening volume.
Basic Setup About the Home Menu This receiver’s Home Menu (HOME MENU) can be used to make various settings and to check and adjust items that have been set. ! The OSD display is only displayed when the receiver’s HDMI OUT 1 terminal and the TV’s HDMI input are connected with an HDMI cable.
Page 43
Basic playback Playing a source ..........................44 Playing an iPod ..........................45 Playing a USB device ........................46 Playing an MHL-compatible device ....................47 Listening to the radio ........................48 Bluetooth ADAPTER for Wireless Enjoyment of Music .............. 49...
Basic playback Playing a source Note Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system. Depending on the input to be played, the playback operation can in some cases be performed using the on- screen display.
! To return to the previous level any time, press RETURN. http://pioneer.jp/homeav/support/ios/na/ ! Installing software versions other than indicated on the website of Pioneer to your iPod/iPhone may result in Use i/j to browse the selected category (e.g., albums). incompatibility with this receiver.
(MP3 players) of format FAT16/32. ! Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this receiver.
Files encoded using Windows Media Codec 9 may be playable but some parts of the specification are not supported; specifi- cally, Pro, Lossless, Voice. Music files e Uncompressed FLAC files are not supported. Pioneer does not guarantee playback. f DSD files cannot be played in the sub zone. Category...
Basic playback Saving station presets Listening to the radio If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and recall whenever you want to listen to that station.
Basic playback Pairing the Bluetooth ADAPTER and Bluetooth wireless technology device Bluetooth ADAPTER for Wireless Enjoyment of Music “Pairing” must be done before you start playback of Bluetooth wireless technology content using the Bluetooth ADAPTER. Make sure to perform pairing the first time you operate the system or any time pairing data is cleared. Device not equipped with The pairing step is necessary to register the Bluetooth wireless technology device to enable Bluetooth communi- Bluetooth...
Page 50
® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners. ! With this receiver, when an iPod is connected or disconnected while the music of a Bluetooth wireless technol- ogy device is playing, the connection with the Bluetooth wireless technology device may be canceled.
Listening to your system Enjoying various types of playback using the listening modes ..........52 Selecting MCACC presets ......................54 Choosing the input signal ......................54 Better sound using Phase Control ....................54...
Listening to your system With two channel sources, you can select from: Enjoying various types of playback using the listening modes Pro Logic IIx MOVIE – Up to 7.1 channel sound (surround back), especially suited to movie sources Pro Logic IIx MUSIC – Up to 7.1 channel sound (surround back), especially suited to music sources Using this receiver, you can listen to any source in surround sound.
Page 53
Listening to your system Using the Advanced surround effects Using Stream Direct The Advanced surround effects can be used for a variety of additional surround sound effects. Most Advanced Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unneces- Surround modes are designed to be used with film soundtracks, but some modes are also suited for music sary signal processing is bypassed, and you’re left with the pure analog or digital sound source.
Listening to your system Selecting MCACC presets Better sound using Phase Control ! Default setting: MEMORY 1 This receiver’s Phase Control feature uses phase correction measures to make sure your sound source arrives at If you have calibrated your system for different listening positions, you can switch between settings to suit the the listening position in phase, preventing unwanted distortion and/or coloring of the sound.
Page 55
Playback with NETWORK features Introduction ........................... 56 Playback with Network functions ....................57 About network playback ......................60 About playable file formats ......................61...
About the Spotify audio stream playback function page iPhone, iPad and the software versions for iTunes that are indicated on the Pioneer website. AirPlay may not be compatible with iPod, iPhone, iPad or iTunes software versions other than those indicated on the Pioneer Notes website.
HTC Connect Certified Smartphones ! Internet radio stations – See Listening to Internet radio stations page The HTC Connect-compatible smartphones, Please check Pioneer website for up to date information about com- ! Pandora – See Listening to Pandora Internet Radio page patible devices and audio format support.
Page 58
Use i/j to select ‘Help’, then press ENTER. Use i/j to select ‘Get access code’, then press ENTER. The access code required for registration on the special Pioneer Internet radio site is displayed. Make a memo of this address. The following can be checked on the Help screen: ! Get access code –...
Page 59
Playback with NETWORK features In order to use the Spotify audio stream playback function from the Spotify About the Spotify audio stream playback function application Spotify is a music streaming distribution service managed and operated by Spotify Ltd. and distributing music To use the Spotify audio stream playback function, select this unit on the Spotify application.
! Some functions may not be supported depending on the server type or version used. Pioneer is not responsible for any malfunction of the player and/or the NETWORK features due to communica- ! Supported file formats vary by server. As such, files not supported by your server are not displayed on this unit.
<a> cally, Pro, Lossless, Voice. Bitrate 8 kbps to 320 kbps e Uncompressed FLAC files are not supported. Pioneer does not guarantee playback. VBR/CBR Supported/Supported f DSD files cannot be played in the sub zone. 32 kHz, 44.1 kHz, 48 kHz, Sampling frequency 88.2 kHz, 96 kHz, 176 4 kHz,...
Page 62
Control with HDMI function About the Control with HDMI function ..................63 Making Control with HDMI connections ..................63 HDMI Setup ............................ 63 Before using synchronization ....................... 64 About synchronized operations ....................64 Setting the PQLS function ......................64 About Sound Retriever Link and Stream Smoother Link ............64 Cautions on the Control with HDMI function ................
About the Control with HDMI function Select ‘HDMI Setup’, then press ENTER. Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are pos- Select the ‘Control’ setting you want. sible when the component is connected to the receiver using an HDMI cable.
! The synchronized amp mode remains in effect even if the receiver’s input is switched to a component other than one connected by HDMI. The operations below can also be used on Pioneer Control with HDMI-compatible TVs. Sound Retriever Link ! When the receiver’s volume is adjusted or the sound is muted, the volume status is displayed on the TV’s...
Control with HDMI function Stream Smoother Link Using the Control with HDMI function, the receiver automatically detects whether a compressed video file is being played on the player, and if so automatically activates the Stream Smoother function. To activate the Stream Smoother Link function, make the setting below. Set the HDMI Setup’s Control to ON, and set the Control Mode setting to ON.
Using other functions Setting the Audio options ......................67 Setting the Video options ......................69 Switching the output (OUTPUT PARAMETER) ................71 Changing the channel level while listening ................71 Using the MULTI-ZONE controls ....................72 Network settings from a web browser ..................73 Using the sleep timer ........................
Using other functions Setting What it does Option(s) Setting the Audio options With the Auto Sound Retriever function, DSP processing is used to There are a number of additional sound settings you can make using the AUDIO PARAMETER menu. The compensate for the loss of audio data upon compression, improving defaults, if not stated, are listed in bold.
Page 68
Using other functions Setting What it does Option(s) Setting What it does Option(s) Some audio sources include ultra-low bass tones. Set the LFE attenu- When you’re not using front wide speakers, selecting this mode ator as necessary to prevent the ultra-low bass tones from distorting c OFF/ –20dB/ –15dB/ V.WIDE allows you to hear a virtual front wide channel through your front...
Using other functions Setting What it does Option(s) Setting the Video options This improves elements that reduce picture quality mainly noticeable There are a number of additional picture settings you can make using the VIDEO PARAMETER menu. The in network contents, such as mosquito noise and block noise. defaults, if not stated, are listed in bold.
Page 70
Using other functions Setting What it does Option(s) Setting What it does Option(s) Adjusts how sharp edges appear. Adjusts saturation from dull to bright. DETAIL c 0 to +8 d <d, e> Default: 0 CHROMA c –6 to +6 d (Chroma Level) Default: 0 <d, e>...
Using other functions Switching the HDMI output Switching the output (OUTPUT PARAMETER) Set which terminal to use when outputting video and audio signals from the HDMI output terminals. You can press OUT P. to switch the output of speaker terminals or HDMI terminals to be played. The HDMI OUT 1 terminal is compatible with the Control with HDMI function.
Using other functions ZONE 2 remote controls Using the MULTI-ZONE controls Before operation, hold down Z2 on the remote control (for 1.5 seconds) until the remote control LED flashes one The following steps use the front panel controls to adjust the sub zone volume and select sources. See ZONE 2 time.
Using other functions Network settings from a web browser Checking your system settings Network settings and Pandora account settings can be made using the browser on a computer connected to the Use the status display screen to check your current settings for features such as surround back channel process- same LAN as the receiver.
Using other functions Setting Default Resetting the system Phase Control Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. iPod/USB, INTERNET RADIO, PANDORA, Set MULTI-ZONE to MULTI ZONE OFF. MEDIA SERVER, FAVORITES, ADAPTER ! Disconnect the iPod and USB memory device from the receiver beforehand.
Controlling the rest of your system About the Remote Setup menu ....................76 Operating multiple receivers ......................76 Setting the remote to control other components............... 76 Selecting preset codes directly ..................... 76 Programming signals from other remote controls ..............77 Erasing one of the remote control button settings ..............
If you can’t find a preset code that matches the component you want to control, you can still teach the remote If you have multiple Pioneer receivers, amplifiers, etc., this setting can be used to prevent other units from individual commands from another remote control (see...
This can also be used to program additional operations (buttons not covered in the presets) after assigning a preset code. The remote can store about 120 preset codes from other components (this has been tested with codes of Pioneer format only).
The All Zone Standby can be used to turn all zones to OFF when the receiver’s power is switched to standby. HDMI 2144 Also, when using separate Pioneer amplifiers/receivers for the sub zones, they can also be set to standby 0305 simultaneously.
Controlling the rest of your system TV and Audio/Video components Controlling components This remote control can control components after entering the proper codes (see Setting the remote to control HDD/BDR/ Button(s) TV (Monitor) BD/DVD SAT/CATV other components page 76 for more on this). Use the input function buttons to select the component. POWER ON/ POWER ON/ POWER ON/...
Page 80
Controlling the rest of your system Audio/Video components TV (Projector) Button(s) CD/CD-R/SACD MD/DAT TAPE Button(s) TV (Projector) u SOURCE POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/OFF u SOURCE POWER ON Number buttons numerics numerics numerics — MOVIE CLEAR STANDARD >10/CLEAR CLEAR <a>...
Page 81
The Advanced MCACC menu Making receiver settings from the Advanced MCACC menu ............ 82 Automatic MCACC (Expert)......................82 Manual MCACC setup ........................84 Checking MCACC Data ........................86 Data Management ......................... 87...
! Auto MCACC – The default is ALL (recommended), but you can limit the system calibration to only one set- The Advanced MCACC (Multi Channel ACoustic Calibration) system was developed in Pioneer’s laboratories with ting (to save time) if you want.
Page 83
The Advanced MCACC menu Connect the microphone to the MCACC SETUP MIC jack on the front panel. Make sure ‘OK’ is selected, then press ENTER. Make sure there are no obstacles between the speakers and the microphone. A progress report is displayed on-screen while the receiver outputs more test tones to determine the optimum receiver settings.
The Advanced MCACC menu Select each channel in turn and adjust the levels (+/–12.0 dB) as necessary. Manual MCACC setup Use k/l to adjust the volume of the speaker you selected to match the reference speaker. When it sounds like both tones are the same volume, press j to confirm and continue to the next channel.
Page 85
The Advanced MCACC menu Standing Wave Acoustic Calibration EQ Professional ! Default setting: ON/ATT 0.0dB (all filters) This setup minimizes the unwanted effects of room reverberation by allowing you to calibrate your system based Acoustic standing waves occur when, under certain conditions, sound waves from your speaker system resonate on the direct sound coming from the speakers.
The Advanced MCACC menu If you selected ‘Reverb Measurement’, select EQ ON or EQ OFF, and then START. Checking MCACC Data The following options determine how the reverb characteristics of your listening area are displayed in Reverb View: At the procedure of Automatically conducting optimum sound tuning (Full Auto MCACC) page 38, the pro-...
The Advanced MCACC menu Select the setting you want to adjust. Speaker Distance ! Memory Rename – Name your MCACC presets for easy identification (see Renaming MCACC presets Use this to display the distance from the different channels to the listening position. See Speaker Distance page 87).
Page 88
The System Setup and Other Setup menus Making receiver settings from the System Setup menu ............89 Manual speaker setup ........................89 Network Setup menu ........................91 Checking the Network Information ..................... 92 MHL Setup ............................92 The Other Setup menu ........................92 Making network settings using Safari..................
Using the MULTI-ZONE controls page 72). ! HDMI Setup – Synchronizes this receiver with your Pioneer component supporting Control with HDMI (page ! HDZONE – Select to use the surround back speaker terminals for an independent system in HDZONE (see 62).
Page 90
The System Setup and Other Setup menus ! Front – Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn’t connect a Channel Level subwoofer. Select SMALL to send the bass frequencies to the subwoofer. Using the channel level settings, you can adjust the overall balance of your speaker system, an important factor ! Center –...
The System Setup and Other Setup menus Proxy Hostname/Proxy Port Network Setup menu This setting is required when you connect this receiver to the Internet via a proxy server. Enter the IP address Make the settings for connecting the receiver to the Internet and using the network functions. of your proxy server in the ‘Proxy Hostname’...
The System Setup and Other Setup menus Parental Lock Auto input switching Set restrictions for using Internet services. Also set the password accompanying the usage restrictions. Select whether or not to switch the input automatically to the MHL input when an MHL-compatible device is ! Upon shipment from the factory, the password is set to “0000”.
Page 93
! If an update file is provided on the Pioneer website, download it onto your computer. When downloading an update file from the Pioneer website onto your computer, the file will be in ZIP format. Unzip the ZIP file before saving it on the USB memory device.
Page 94
The System Setup and Other Setup menus Software Update messages ! –40 dB Fixed/0 dB Fixed – The Zone 2 volume level output from the receiver is fixed to the value set here. When you’re finished, press RETURN. Status messages Descriptions You will return to the Other Setup menu.
The System Setup and Other Setup menus Making network settings using Safari Using Safari to set a friendly name Launch Safari on your computer. Launch Safari on your computer. Press Bookmark icon. Click Bonjour list (a), and then select this receiver’s name Press Bookmark icon.
The System Setup and Other Setup menus The firmware upload status screen is displayed. Using Safari to update the firmware “The upload process finished successfully.” will be shown when the update is completed. Once updating is completed, the receiver’s power automatically turns off. Launch Safari on your computer.
Page 97
Troubleshooting ..........................98 Power ..............................98 No sound ............................98 Other audio problems ........................99 ADAPTER PORT terminal ......................100 Video .............................100 Settings ............................101 Professional Calibration EQ graphical output ................101 Display ............................101 Remote control ..........................102 HDMI .............................102 MHL ...............................103 Built-in AVNavigator ........................103 USB interface ..........................104 iPod ...............................104 Network............................104...
If the trouble cannot be rectified even after exercis- request repair. ing the checks listed below, ask your nearest Pioneer authorized independent service company to carry out repair AMP OVERHEAT blinks in the dis- Allow the unit to cool down in a well-ventilated place before switching back on (see work.
+12dB maximum. Certain listening modes or When Operation Mode is set to Basic, the Pioneer-recommended settings are made and HOME MENU items cannot be not all of the functions can be used. To use all of the functions without restrictions, set selected.
Symptom Remedy Video The volume level drops automati- The temperature within the unit has exceeded the allowable value. Try moving the unit for cally. better ventilation (see Installing the receiver page 10). Symptom Remedy Volume seems different when input Set the Channel Level setting to ALL, then adjust the volume of the respective input No image is output when an input is Check the video connections of the source component.
Check that the player is connected using a digital connection. Certain listening modes or When Operation Mode is set to Basic, the Pioneer-recommended settings are made and sources, the receiver’s format indica- Make sure that the receiver is set to AUTO or DIGITAL (see...
Symptom Remedy HDMI When playing a disc with the listen- Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal ing mode set to Auto Surround or page 54). Symptom Remedy ALC, Pro Logic II or DTS Neo:X If a two channel soundtrack is currently playing (including Dolby Surround encoded), The HDMI indicator blinks continu- Check all the points below.
Symptom Remedy HDCP ERROR shows in the display. Check whether or not the connected component is compatible with HDCP. If it is not compatible with HDCP, reconnect the source device using a different type of connection Symptom Remedy (component or composite). Some components that are compatible with HDCP still cause When playing an MHL-compat- The MHL device will not operate unless power is being supplied from this receiver.
USB interface iPod Symptom Cause Remedy Symptom Cause Remedy The folders/files stored on a The folders/files are currently stored Store the folders/files in the FAT region. iPod is not recognized. This receiver recognizes the iPod as Switch off and on again this receiver. USB memory device are not in a region other than the FAT (File a fraud.
Page 105
Symptom Cause Remedy Symptom Cause Remedy The audio files stored on Windows Media Player 11 or Install Windows Media Player 11 or Windows Media Player Audio playback is undesir- The audio file currently being played Check whether the audio file was recorded in a format sup- components on the net- Windows Media Player 12 is not cur- 12 on your PC...
Page 106
Symptom Cause Remedy The sound of the Spotify — Check whether this unit is selected on the Spotify applica- audio stream is not pro- tion. duced. Check that contents are playing on the Spotify application. If the above does not solve the problem, turn this unit’s power off then back on.
Network connections cannot be established even when the above measures are taken. with the receiver or the USB cable. Unplug the receiver from the wall and call a Pioneer authorized inde- ! Reset the wireless LAN converter. After this, redo the wireless LAN converter’s settings.
Page 108
Additional information Surround sound formats ......................109 SABRE DAC ..........................109 About HDMI ..........................109 HTC Connect ..........................109 About iPod ...........................110 Windows 8 ...........................110 MHL ...............................110 Software license notice .......................110 Auto Surround, ALC and Stream Direct with different input signal formats ......111 Speaker Setting Guide ........................
Additional information Surround sound formats SABRE DAC Below is a brief description of the main surround sound formats you’ll find on BDs, DVDs, satellite, cable and terrestrial broadcasts, and video cassettes. Dolby The Dolby technologies are explained below. See http://www.dolby.com for more detailed information. SABRE DAC and the logo are trademarks of ESS Technology, Inc.
However, if all the speakers are pointed Dolby Digital EX Dolby Digital EX towards the listening position, the sound field will seem cramped. Testing by the Pioneer Multi-channel Research Dolby Digital EX (6.1 channel flagged) Pro Logic IIx MOVIE...
Additional information Also note that placing it near a wall may result in sympathetic vibrations with the building that could excessively About messages displayed when using network functions amplify the bass sound. If the subwoofer must be installed near a wall, place it at an angle so that it is not parallel to the wall surface. This Refer to the following information when you come up with a status message while operating the Network can help reduce any sympathetic vibrations, but depending on the shape of the room this could result in stand- functions.
Additional information Important information regarding the HDMI connection Glossary There are cases where you may not be able to route HDMI signals through this receiver (this depends on the HDMI-equipped component you are connecting-check with the manufacturer for HDMI compatibility Audio formats/Decoding information).
Page 114
The term “decoding” (or “matrix decoding”) is also used for the technol- Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are pos- ogy which converts 2-channel sound sources into multiple channels or expands 5.1-channel signals into 6.1 or sible when the component is connected to the receiver using an HDMI cable.
Page 115
Additional information Windows Media Player 11/Windows Media Player 12 Receiver function Windows Media Player is software to deliver music, photos and movies from a Microsoft Windows computer to Operation Mode home stereo systems and TVs. This receiver is equipped with a great number of functions and settings. The Operation Mode feature is provided With this software, you can play back files stored on the PC through various devices wherever you like in your for users who find it difficult to master all these functions and settings.
Additional information vTuner Features index Listening to Internet radio stations page DLNA Operation Mode About network playback page Operation Mode Setup page AirPlay AVNavigator Using AirPlay on iPod touch, iPhone, iPad, and iTunes page How to use the built-in AVNavigator page Wireless LAN ECO MODE 1, 2...
Additional information Number of Furnished Parts Specifications MCACC Setup microphone .............................. 1 Remote control unit ................................1 Amplifier section AAA size IEC R03 dry cell batteries ..........................2 Continuous average power output of 90 watts* per channel, min., at 8 ohms, from 20 Hz to 20 000 Hz AM loop antenna ................................