Multi Operations - Pioneer Elite VSX-37TX Operating Instructions Manual

Multi Operations

A Multi Operation is a sequence of commands programmed into a single button to save you a lot of repetitive
button pressing. Once setup, pressing the MULTI OPERATION button followed by one of the MULTI CONTROL
buttons will switch on that component, the receiver and your TV, and switch the function of the receiver to that
component. Up to five more commands can be programmed into a Multi Operation, such as changing the sound
mode of the receiver and starting playback of the source.
Important: For Multi Operations to work with other non-Pioneer components, you must first setup the remote to
control those other components—see pages 58-61 for more on this.
Î
USE SETUP
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1 VCR2
MULTI CONTROL
MD/
CD TUNER TVCONT
TAPE1
CLASS MPX BAND DIRECT ACCESS
7 3 8
¶
-
+ - +
TUNING STATION
1 ¡ 4 ¢
- +
DTV ON/OFF DTV MENU CHANNEL
1 2 3
4 5 6
7 8 9
GUIDE EXIT
0
ENTER
+10 DISC
+ +
TV
TV VOL TV CONTROL VOLUME
– –
TV FUNC
REMOTE SETUP
2
INPUT
MENU MUTE
ATT
SYSTEM SETUP
EFFECT/ +
FUNCTION
CH SEL
ENTER
DIGITAL SIGNAL
–
NR
SELECT
MULTI CH STEREO/
MIDNIGHT DSP
INPUT DIRECT
/ DTS
ADVANCED
LIGHT THX STANDARD
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1 1 Set the remote control slide switch to
SETUP.
3,4
Also make sure that your TV is on and set to the receiver.
2 Press the REMOTE SETUP button (INPUT
ATT) and
2
MULTI OPERATION SETUP mode.
The REMOTE SETUP menu appears on your TV screen. The
MULTI CONTROL and the SYSTEM OFF buttons start to blink
(see the following page for more on the SYSTEM OFF button).
Multi-operation
1Select an item from the
Multi-Contorol buttons.
(ex. DVD)
2Select the operation
button. (ex. DVD = MENU)
3First command has been
learned.
4You can repeat this
proccess for 5 commands.
EXIT = Remote Setup
• To cancel here, press REMOTE SETUP.
3 Select a MULTI CONTROL button for this
MULTI OPERATION.
Each MULTI CONTROL button can be used for one Multi
Operation. If a Multi Operation relates to using a DVD player,
for example, it makes sense to select the DVD/LD button.
After pressing a MULTI CONTROL button, just that button will
remain blinking.
4 Select the MULTI CONTROL button for a
source component.
For example, if you want this Multi Operation to switch on your
DVD player press the DVD/LD.
After pressing a MULTI CONTROL button, that button stays lit.
Using Other Functions
at the same time to select the
3
71