Multi Channel In Playback; 96Khz 24Bit Performance - Pioneer Elite VSX-37TX Operating Instructions Manual

MULTI CHANNEL IN Playback

MULTI CH IN allows you to connect an external decoder to enjoy certain types of specialized discs. To use
MULTI CH IN playback follow the instructions below.
Î
USE SETUP
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1 VCR2
MULTI CONTROL
MD/
CD TUNER TVCONT
TAPE1
CLASS MPX BAND DIRECT ACCESS
¶ 7 3 8
- -
+ +
TUNING STATION
1 ¡ 4 ¢
- +
DTV ON/OFF DTV MENU CHANNEL
1 2 3
4 5 6
7 8 9
GUIDE EXIT
0
ENTER
DISC
+10
+ +
TV
TV VOL TV CONTROL VOLUME
– –
TV FUNC
REMOTE SETUP
INPUT
MENU MUTE
ATT
SYSTEM SETUP
EFFECT/ + FUNCTION
CH SEL
ENTER
DIGITAL SIGNAL
–
NR SELECT
2
MULTI CH STEREO/
MIDNIGHT DSP
INPUT DIRECT
/ DTS
LIGHT THX ADVANCED STANDARD
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
96 kHz 24 bit Performance
This receiver is capable of playing back advanced DVD discs which are recorded in 96 kHz/24 bit format (these
are all stereo discs) and any source recorded in 96 kHz and up to 24 bit. The receiver will automatically read the
format of the source and play accordingly (of course the SIGNAL SELECT will have to set to AUTO or DIGITAL
to read the DVD soundtrack). When the receiver plays a 96 kHz disc "96 kHz" and whatever mode you're using
(for example "STEREO," "DIRECT" or "DNR") will appear in the display.
SIGNAL STEREO
SELECT
A
SP
DIGITAL
AUTO
1 Put the remote control slide switch in USE.
1
2 Press the MULTI CH INPUT button on the
remote control or the front panel.
Each press switches the input between the previous mode and
MULTI CH IN.
SIGNAL
SELECT
ANALOG SP A
When MULTI CH IN is used in BYPASS mode only the volume
memo
level can be set. All of this unit's other features (DIGITAL NR
etc.) cannot be used. Also, all speaker settings and other setup
settings have no effect.
2
N∫m¿≤≥ım
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
STANDBY/ON
DSP STEREO/
STANDBY MODE
DIRECT
/DTS
THX CINEMA ADVANCED STANDARD
VIDEO VCR 1/DVR VCR 2
CHANNEL
MULTI CH
INPUT TONE SELECT LOUDNESS
VIDEO INPUT
S-VIDEO VIDEO L AUDIO R
PHONES
SPEAKERS - BASS +
•
memo
VOLUME
dB
•
•
•
•
VOLUME
INPUT
MULTI-ROOM
SELECTOR
&SOURCE
CONTROL
MASTER
MD/TAPE1/
DVD/LD TV/SAT CD CD-R TUNER PHONO VOLUME
DIGITAL SIGNAL FL
NR SELECT DIMMER CLASS BAND - TUNING +
VIDEO TAPE 2 TUNER CONTROL
- TREBLE + SELCT MONITOR MPX MEMORY - STATION +
MIN MAX
When a 96 kHz/24 bit disc is played back the volume
may be louder than that of a normal disc.
Some DVD players cannot play 96 kHz/24 bit discs.
Check the manual of your DVD player to make sure.
During this playback the player enters the STEREO
mode and you can use the controls available in
STEREO mode (LOUDNESS, MIDNIGHT, TONE
controls, etc., see p.49-50).
With 96 kHz/24 bit discs you are able to use MULTI
CH IN playback and the TAPE 2 MONITOR.
In 96 kHz/24 bit mode you can't use the STANDARD,
ADVANCED THEATER, THX, or DSP modes.
Basic Playback
dB
51