Installation With Windows Nt; Installing Network Software And Drivers - Allied Telesis AT-2450 Installation Manual

Chapter 6

Installation with Windows NT

Installing Network Software and Drivers

The Windows Miniport (NDIS) driver supports Windows NT
3.5 or later. If you are running version 3.1, you can either
upgrade your copy of Windows NT or download the 3.1 driver,
AT2450.SYS, from the ATI web site; the URL is
http://www.alliedtelesyn.com.
1. If the AT-2450 adapter card is already installed, reboot into
Windows NT. If you have not installed the AT-2450
adapter card into your computer, shutdown the computer,
turn it off and unplug it. Install the card by following the
instructions that came with your computer and in
Chapter 2, "Installing the Card in a PCI Slot." Then turn
the computer on again. Boot into Windows NT.
2. NT 3.5x: Open the Main program group by double-clicking
its icon.
NT 4.0: Double-click the Network icon in the Control
Panel.
3. NT 3.5x: Double-click the Control Panel icon; double-click
the Network icon. From the Network box, click Add
Adapter.
NT 4.0: Select the Adapters tab; click the Add button.
NOTE
13