What Else You Need - Allied Telesis AT-2450 Installation Manual

AT-2450 PCI Ethernet Adapter Card
Card Model 10BASE-T
AT-2450T Supported
AT-2450BT Supported
AT-2450FT Supported

What Else You Need

To use the Allied Telesyn AT-2450 PCI Ethernet Adapter Card,
you must have access to an Ethernet network running network
software like Novell
To connect to the network, you will also need cables, connectors,
and terminators, depending on the Ethernet medium you use.
Your computer must be an IBM-PC or compatible with the
following specifications:
A Peripheral Control Interface (PCI) bus with available slot
Compatible operating system such as Windows 95,
Windows NT, Windows for Workgroups, Windows 3.1,
DOS, OS/2
Approximately 32K of available RAM, depending on the
driver installed
512K of available RAM and DOS or Windows 95 or NT
when running CardAssistant setup/diagnostics software
2
Table 1: Supported Network Media
10BASE2
N/A
Supported
N/A
® ®
NetWare
® ®
or SCO UNIX
10BASE5
N/A
N/A
N/A
®
or Microsoft Windows
®
10BASE-FL
N/A
N/A
Supported
®
95.