Installation With Odi Workstation; Installing Network Software And Drivers - Allied Telesis AT-2450 Installation Manual

Pci ethernet adapter card

Hide thumbs Also See for AT-2450:

Table of Contents

Chapter 4

Installation with ODI Workstation

1. Insert a DOS boot diskette in the diskette drive, turn your

computer on, and boot into DOS.

2. Insert the Novell Workstation Installation diskette

"WS_DOS1" into the drive and run "Install".

3. Follow the installation instructions, making the

appropriate changes for your system such as altering

startup files and Windows support.

4. The ODI workstation driver is in the root directory of the

CardAssistant diskette. Insert this diskette when

prompted for the drivers.

5. The AT-2450 should appear in the "Insert the Driver Disk"

menu. Select the driver and press

6. Once the driver is installed, complete the installation of the

network software and then reboot the computer to load the

driver files.

ENTER

Table of Contents

At-2450 bt At-2450 ft